Abstract.pm

package SQL::Abstract; # see doc at end of file

use strict;
use warnings;
use Carp ();
use List::Util ();
use Scalar::Util ();

use Exporter 'import';
our @EXPORT_OK = qw(is_plain_value is_literal_value is_undef_value);

BEGIN {
  if ($] < 5.009_005) {
    require MRO::Compat;
  }
  else {
    require mro;
  }

  *SQL::Abstract::_ENV_::DETECT_AUTOGENERATED_STRINGIFICATION = $ENV{SQLA_ISVALUE_IGNORE_AUTOGENERATED_STRINGIFICATION}
    ? sub () { 0 }
    : sub () { 1 }
  ;
}

#======================================================================
# GLOBALS
#======================================================================

our $VERSION  = '2.000001';

# This would confuse some packagers
$VERSION = eval $VERSION if $VERSION =~ /_/; # numify for warning-free dev releases

our $AUTOLOAD;

# special operators (-in, -between). May be extended/overridden by user.
# See section WHERE: BUILTIN SPECIAL OPERATORS below for implementation
my $BUILTIN_SPECIAL_OPS_re = qr/
    ^ (?:
        (?: (?: not \s )? (?: between | in ) ) |
        (?: is (?: \s+ not )?                ) |
        ident |
        value
    ) $
/ix;

#======================================================================
# DEBUGGING AND ERROR REPORTING
#======================================================================

sub _debug {
  return unless $_[0]->{debug}; shift; # a little faster
  my $func = (caller(1))[3];
  warn "[$func] ", @_, "\n";
}

sub belch (@) {
  my($func) = (caller(1))[3];
  Carp::carp "[$func] Warning: ", @_;
}

sub puke (@) {
  my($func) = (caller(1))[3];
  Carp::croak "[$func] Fatal: ", @_;
}

sub is_literal_value ($) {
    ref $_[0] eq 'SCALAR'                                     ? [ ${$_[0]} ]
  : ( ref $_[0] eq 'REF' and ref ${$_[0]} eq 'ARRAY' )        ? [ @${ $_[0] } ]
  : undef;
}

sub is_undef_value ($) {
  !defined($_[0])
  or (
    ref($_[0]) eq 'HASH'
    and exists $_[0]->{-value}
    and not defined $_[0]->{-value}
  );
}

# FIXME XSify - this can be done so much more efficiently
sub is_plain_value ($) {
  no strict 'refs';
    ! length ref $_[0]                                        ? \($_[0])
  : (
    ref $_[0] eq 'HASH' and keys %{$_[0]} == 1
      and
    exists $_[0]->{-value}
  )                                                           ? \($_[0]->{-value})
  : (
      # reuse @_ for even moar speedz
      defined ( $_[1] = Scalar::Util::blessed $_[0] )
        and
      # deliberately not using Devel::OverloadInfo - the checks we are
      # intersted in are much more limited than the fullblown thing, and
      # this is a very hot piece of code
      (
        # simply using ->can('(""') can leave behind stub methods that
        # break actually using the overload later (see L<perldiag/Stub
        # found while resolving method "%s" overloading "%s" in package
        # "%s"> and the source of overload::mycan())
        #
        # either has stringification which DBI SHOULD prefer out of the box
        grep { *{ (qq[${_}::(""]) }{CODE} } @{ $_[2] = mro::get_linear_isa( $_[1] ) }
          or
        # has nummification or boolification, AND fallback is *not* disabled
        (
          SQL::Abstract::_ENV_::DETECT_AUTOGENERATED_STRINGIFICATION
            and
          (
            grep { *{"${_}::(0+"}{CODE} } @{$_[2]}
              or
            grep { *{"${_}::(bool"}{CODE} } @{$_[2]}
          )
            and
          (
            # no fallback specified at all
            ! ( ($_[3]) = grep { *{"${_}::()"}{CODE} } @{$_[2]} )
              or
            # fallback explicitly undef
            ! defined ${"$_[3]::()"}
              or
            # explicitly true
            !! ${"$_[3]::()"}
          )
        )
      )
    )                                                          ? \($_[0])
  : undef;
}



#======================================================================
# NEW
#======================================================================

our %Defaults = (
  expand => {
    bool => '_expand_bool',
    row => '_expand_row',
    op => '_expand_op',
    func => '_expand_func',
    values => '_expand_values',
    list => '_expand_list',
  },
  expand_op => {
    (map +($_ => __PACKAGE__->make_binop_expander('_expand_between')),
      qw(between not_between)),
    (map +($_ => __PACKAGE__->make_binop_expander('_expand_in')),
      qw(in not_in)),
    (map +($_ => '_expand_op_andor'), ('and', 'or')),
    (map +($_ => '_expand_op_is'), ('is', 'is_not')),
    (map +($_ => __PACKAGE__->make_unop_expander("_expand_${_}")),
      qw(ident value nest)),
    bind => __PACKAGE__->make_unop_expander(sub { +{ -bind => $_[2] } }),
  },
  render => {
    (map +($_, "_render_$_"),
      qw(op func bind ident literal row values keyword)),
  },
  render_op => {
    (map +($_ => '_render_op_between'), 'between', 'not_between'),
    (map +($_ => '_render_op_in'), 'in', 'not_in'),
    (map +($_ => '_render_unop_postfix'),
      'is_null', 'is_not_null', 'asc', 'desc',
    ),
    (not => '_render_unop_paren'),
    (map +($_ => '_render_op_andor'), qw(and or)),
    ',' => '_render_op_multop',
  },
  clauses_of => {
    delete => [ qw(target where returning) ],
    update => [ qw(target set where returning) ],
    insert => [ qw(target fields from returning) ],
    select => [ qw(select from where order_by) ],
  },
  expand_clause => {
    'delete.from' => '_expand_delete_clause_target',
    'update.update' => '_expand_update_clause_target',
    'insert.into' => '_expand_insert_clause_target',
    'insert.values' => '_expand_insert_clause_from',
  },
  render_clause => {
    'delete.target' => '_render_delete_clause_target',
    'update.target' => '_render_update_clause_target',
    'insert.target' => '_render_insert_clause_target',
    'insert.fields' => '_render_insert_clause_fields',
    'insert.from' => '_render_insert_clause_from',
  },
);

foreach my $stmt (keys %{$Defaults{clauses_of}}) {
  $Defaults{expand}{$stmt} = '_expand_statement';
  $Defaults{render}{$stmt} = '_render_statement';
  foreach my $clause (@{$Defaults{clauses_of}{$stmt}}) {
    $Defaults{expand_clause}{"${stmt}.${clause}"}
      = "_expand_${stmt}_clause_${clause}";
  }
}

sub new {
  my $self = shift;
  my $class = ref($self) || $self;
  my %opt = (ref $_[0] eq 'HASH') ? %{$_[0]} : @_;

  # choose our case by keeping an option around
  delete $opt{case} if $opt{case} && $opt{case} ne 'lower';

  # default logic for interpreting arrayrefs
  $opt{logic} = $opt{logic} ? uc $opt{logic} : 'OR';

  # how to return bind vars
  $opt{bindtype} ||= 'normal';

  # default comparison is "=", but can be overridden
  $opt{cmp} ||= '=';

  # try to recognize which are the 'equality' and 'inequality' ops
  # (temporary quickfix (in 2007), should go through a more seasoned API)
  $opt{equality_op}   = qr/^( \Q$opt{cmp}\E | \= )$/ix;
  $opt{inequality_op} = qr/^( != | <> )$/ix;

  $opt{like_op}       = qr/^ (is_)?r?like $/xi;
  $opt{not_like_op}   = qr/^ (is_)?not_r?like $/xi;

  # SQL booleans
  $opt{sqltrue}  ||= '1=1';
  $opt{sqlfalse} ||= '0=1';

  # special operators
  $opt{special_ops} ||= [];

  # unary operators
  $opt{unary_ops} ||= [];

  # rudimentary sanity-check for user supplied bits treated as functions/operators
  # If a purported  function matches this regular expression, an exception is thrown.
  # Literal SQL is *NOT* subject to this check, only functions (and column names
  # when quoting is not in effect)

  # FIXME
  # need to guard against ()'s in column names too, but this will break tons of
  # hacks... ideas anyone?
  $opt{injection_guard} ||= qr/
    \;
      |
    ^ \s* go \s
  /xmi;

  $opt{expand_unary} = {};

  foreach my $name (sort keys %Defaults) {
    $opt{$name} = { %{$Defaults{$name}}, %{$opt{$name}||{}} };
  }

  if ($class ne __PACKAGE__) {

    # check for overriden methods

    foreach my $type (qw(insert update delete)) {
      my $method = "_${type}_returning";
      if (__PACKAGE__->can($method) ne $class->can($method)) {
        my $clause = "${type}.returning";
        $opt{expand_clause}{$clause} = sub { $_[2] },
        $opt{render_clause}{$clause}
          = sub { [ $_[0]->$method($_[3]) ] };
      }
    }
    if (__PACKAGE__->can('_table') ne $class->can('_table')) {
      $opt{expand_clause}{'select.from'} = sub {
        return +{ -literal => [ $_[0]->_table($_[2]) ] };
      };
    }
    if (__PACKAGE__->can('_order_by') ne $class->can('_order_by')) {
      $opt{expand_clause}{'select.order_by'} = sub { $_[2] };
      $opt{render_clause}{'select.order_by'} = sub {
        [ $_[0]->_order_by($_[2]) ];
      };
    }
    if (__PACKAGE__->can('_select_fields') ne $class->can('_select_fields')) {
      $opt{expand_clause}{'select.select'} = sub { $_[2] };
      $opt{render_clause}{'select.select'} = sub {
        my @super = $_[0]->_select_fields($_[2]);
        my $effort = [
          ref($super[0]) eq 'HASH'
            ? $_[0]->render_expr($super[0])
            : @super
        ];
        return $_[0]->join_query_parts(
          ' ', { -keyword => 'select' }, $effort
        );
      };
    }
    foreach my $type (qw(in between)) {
      my $meth = "_where_field_".uc($type);
      if (__PACKAGE__->can($meth) ne $class->can($meth)) {
        my $exp = sub {
          my ($self, $op, $v, $k) = @_;
          $op = join ' ', split '_', $op;
          return +{ -literal => [
            $self->$meth($k, $op, $v)
          ] };
        };
        $opt{expand_op}{$_} = $exp for $type, "not_${type}";
      }
    }
    if ($class->isa('DBIx::Class::SQLMaker')) {
      $opt{warn_once_on_nest} = 1;
      $opt{disable_old_special_ops} = 1;
      $opt{render_clause}{'select.where'} = sub {
        my ($sql, @bind) = $_[0]->where($_[2]);
        s/\A\s+//, s/\s+\Z// for $sql;
        return [ $sql, @bind ];
      };
      $opt{expand_op}{ident} = $class->make_unop_expander(sub {
        my ($self, undef, $body) = @_;
        $body = $body->from if Scalar::Util::blessed($body);
        $self->_expand_ident(ident => $body);
      });
    }
    if ($class->isa('SQL::Abstract::More')) {
      my $orig = $opt{expand_op}{or};
      $opt{expand_op}{or} = sub {
        my ($self, $logop, $v, $k) = @_;
        if ($k and ref($v) eq 'ARRAY') {
          my ($type, $val) = @$v;
          my $op;
          if (
            ref($type) eq 'HASH' and ref($val) eq 'HASH'
            and keys %$type == 1 and keys %$val == 1
            and (keys %$type)[0] eq (keys %$val)[0]
          ) {
            ($op) = keys %$type;
            ($type) = values %$type;
            ($val) = values %$val;
          }
          if ($self->is_bind_value_with_type(my $v = [ $type, $val ])) {
            return $self->expand_expr(
              { $k, map +($op ? { $op => $_ } : $_), { -bind => $v } }
            );
          }
        }
        return $self->$orig($logop, $v, $k);
      };
      $opt{render}{bind} = sub {
        return [ '?', map +(ref($_->[0]) ? $_ : $_->[1]), $_[2] ]
      };
    }
  }

  if ($opt{lazy_join_sql_parts}) {
    require SQL::Abstract::Parts;
    $opt{join_sql_parts} ||= sub { SQL::Abstract::Parts->new(@_) };
  }

  $opt{join_sql_parts} ||= sub { join $_[0], @_[1..$#_] };

  return bless \%opt, $class;
}

sub _ext_rw {
  my ($self, $name, $key, $value) = @_;
  return $self->{$name}{$key} unless @_ > 3;
  $self->{$name}{$key} = $value;
  return $self;
}

sub make_unop_expander {
  my (undef, $exp) = @_;
  sub {
    my ($self, $name, $body, $k) = @_;
    return $self->_expand_hashpair_cmp($k, { "-${name}" => $body })
      if defined($k);
    return $self->$exp($name, $body);
  }
}

sub make_binop_expander {
  my (undef, $exp) = @_;
  sub {
    my ($self, $name, $body, $k) = @_;
    $k = shift @{$body = [ @$body ]} unless defined $k;
    $k = ref($k) ? $k : { -ident => $k };
    return $self->$exp($name, $body, $k);
  }
}

sub plugin {
  my ($self, $plugin, @args) = @_;
  unless (ref $plugin) {
    $plugin =~ s/\A\+/${\__PACKAGE__}::Plugin::/;
    require(join('/', split '::', $plugin).'.pm');
  }
  $plugin->apply_to($self, @args);
  return $self;
}

BEGIN {
  foreach my $type (qw(
    expand op_expand render op_render clause_expand clause_render
  )) {
    my $name = join '_', reverse split '_', $type;
    my $singular = "${type}er";

    eval qq{sub ${singular} {
      my \$self = shift;
      return \$self->_ext_rw('${name}', \@_) if \@_ == 1;
      return \$self->${singular}s(\@_)
    }; 1 } or die "Method builder failed for ${singular}: $@";
    eval qq{sub wrap_${singular} {
      shift->wrap_${singular}s(\@_)
    }; 1 } or die "Method builder failed for wrap_${singular}: $@";

    eval qq{sub ${singular}s {
      my (\$self, \@args) = \@_;
      while (my (\$this_key, \$this_value) = splice(\@args, 0, 2)) {
        \$self->_ext_rw('${name}', \$this_key, \$this_value);
      }
      return \$self;
    }; 1 } or die "Method builder failed for ${singular}s: $@";
    eval qq{sub wrap_${singular}s {
      my (\$self, \@args) = \@_;
      while (my (\$this_key, \$this_builder) = splice(\@args, 0, 2)) {
        my \$orig = \$self->_ext_rw('${name}', \$this_key);
        \$self->_ext_rw(
          '${name}', \$this_key,
           \$this_builder->(\$orig, '${name}', \$this_key),
        );
      }
      return \$self;
    }; 1 } or die "Method builder failed for wrap_${singular}s: $@";
    eval qq{sub ${singular}_list { sort keys %{\$_[0]->{\$name}} }; 1; }
     or die "Method builder failed for ${singular}_list: $@";
  }
  foreach my $singular (qw(unop_expander binop_expander)) {
    eval qq{sub ${singular} { shift->${singular}s(\@_) }; 1 }
      or die "Method builder failed for ${singular}: $@";
    eval qq{sub ${singular}s {
      my (\$self, \@args) = \@_;
      while (my (\$this_key, \$this_value) = splice(\@args, 0, 2)) {
        \$self->_ext_rw(
           expand_op => \$this_key,
           \$self->make_${singular}(\$this_value),
        );
      }
      return \$self;
    }; 1 } or die "Method builder failed for ${singular}s: $@";
  }
}

#sub register_op { $_[0]->{is_op}{$_[1]} = 1; $_[0] }

sub statement_list { sort keys %{$_[0]->{clauses_of}} }

sub clauses_of {
  my ($self, $of, @clauses) = @_;
  unless (@clauses) {
    return @{$self->{clauses_of}{$of}||[]};
  }
  if (ref($clauses[0]) eq 'CODE') {
    @clauses = $self->${\($clauses[0])}(@{$self->{clauses_of}{$of}||[]});
  }
  $self->{clauses_of}{$of} = \@clauses;
  return $self;
}

sub clone {
  my ($self) = @_;
  bless(
    {
      (map +($_ => (
        ref($self->{$_}) eq 'HASH'
          ? { %{$self->{$_}} }
          : $self->{$_}
      )), keys %$self),
    },
    ref($self)
  );
}

sub sqltrue { +{ -literal => [ $_[0]->{sqltrue} ] } }
sub sqlfalse { +{ -literal => [ $_[0]->{sqlfalse} ] } }

sub _assert_pass_injection_guard {
  if ($_[1] =~ $_[0]->{injection_guard}) {
    my $class = ref $_[0];
    puke "Possible SQL injection attempt '$_[1]'. If this is indeed a part of the "
     . "desired SQL use literal SQL ( \'...' or \[ '...' ] ) or supply your own "
     . "{injection_guard} attribute to ${class}->new()"
  }
}


#======================================================================
# INSERT methods
#======================================================================

sub insert {
  my ($self, $table, $data, $options) = @_;

  my $stmt = do {
    if (ref($table) eq 'HASH') {
      $table;
    } else {
      my %clauses = (target => $table, values => $data, %{$options||{}});
      \%clauses;
    }
  };
  my @rendered = $self->render_statement({ -insert => $stmt });
  return wantarray ? @rendered : $rendered[0];
}

sub _expand_insert_clause_target {
  +(target => $_[0]->expand_expr($_[2], -ident));
}

sub _expand_insert_clause_fields {
  return +{ -row => [
    $_[0]->expand_expr({ -list => $_[2] }, -ident)
  ] } if ref($_[2]) eq 'ARRAY';
  return $_[2]; # should maybe still expand somewhat?
}

sub _expand_insert_clause_from {
  my ($self, undef, $data) = @_;
  if (ref($data) eq 'HASH' and (keys(%$data))[0] =~ /^-/) {
    return $self->expand_expr($data);
  }
  my ($f_aqt, $v_aqt) = $self->_expand_insert_values($data);
  return (
    from => { -values => [ $v_aqt ] },
    ($f_aqt ? (fields => $f_aqt) : ()),
  );
}

sub _expand_insert_clause_returning {
  +(returning => $_[0]->expand_expr({ -list => $_[2] }, -ident));
}

sub _expand_insert_values {
  my ($self, $data) = @_;
  if (is_literal_value($data)) {
    (undef, $self->expand_expr($data));
  } else {
    my ($fields, $values) = (
      ref($data) eq 'HASH' ?
        ([ sort keys %$data ], [ @{$data}{sort keys %$data} ])
        : ([], $data)
    );

    # no names (arrayref) means can't generate bindtype
    !($fields) && $self->{bindtype} eq 'columns'
      && belch "can't do 'columns' bindtype when called with arrayref";

    +(
      (@$fields
        ? $self->expand_expr({ -row => $fields }, -ident)
        : undef
      ),
      +{ -row => [
        map {
         local our $Cur_Col_Meta = $fields->[$_];
         $self->_expand_insert_value($values->[$_])
         } 0..$#$values
      ] },
    );
  }
}

sub _render_insert_clause_fields {
  return $_[0]->render_aqt($_[2]);
}

sub _render_insert_clause_target {
  my ($self, undef, $from) = @_;
  $self->join_query_parts(' ', { -keyword => 'insert into' }, $from);
}

sub _render_insert_clause_from {
  return $_[0]->render_aqt($_[2], 1);
}

# So that subclasses can override INSERT ... RETURNING separately from
# UPDATE and DELETE (e.g. DBIx::Class::SQLMaker::Oracle does this)
sub _insert_returning { shift->_returning(@_) }

sub _redispatch_returning {
  my ($self, $type, undef, $returning) = @_;
  [ $self->${\"_${type}_returning"}({ returning => $returning }) ];
}

sub _returning {
  my ($self, $options) = @_;

  my $f = $options->{returning};

  my ($sql, @bind) = @{ $self->render_aqt(
    $self->expand_expr({ -list => $f }, -ident)
  ) };
  my $rsql = $self->_sqlcase(' returning ').$sql;
  return wantarray ? ($rsql, @bind) : $rsql;
}

sub _expand_insert_value {
  my ($self, $v) = @_;

  my $k = our $Cur_Col_Meta;

  if (ref($v) eq 'ARRAY') {
    if ($self->{array_datatypes}) {
      return +{ -bind => [ $k, $v ] };
    }
    my ($sql, @bind) = @$v;
    $self->_assert_bindval_matches_bindtype(@bind);
    return +{ -literal => $v };
  }
  if (ref($v) eq 'HASH') {
    if (grep !/^-/, keys %$v) {
      belch "HASH ref as bind value in insert is not supported";
      return +{ -bind => [ $k, $v ] };
    }
  }
  if (!defined($v)) {
    return +{ -bind => [ $k, undef ] };
  }
  return $self->expand_expr($v);
}



#======================================================================
# UPDATE methods
#======================================================================

sub update {
  my ($self, $table, $set, $where, $options) = @_;

  my $stmt = do {
    if (ref($table) eq 'HASH') {
      $table
    } else {
      my %clauses;
      @clauses{qw(target set where)} = ($table, $set, $where);
      puke "Unsupported data type specified to \$sql->update"
        unless ref($clauses{set}) eq 'HASH';
      @clauses{keys %$options} = values %$options;
      \%clauses;
    }
  };
  my @rendered = $self->render_statement({ -update => $stmt });
  return wantarray ? @rendered : $rendered[0];
}

sub _render_update_clause_target {
  my ($self, undef, $target) = @_;
  $self->join_query_parts(' ', { -keyword => 'update' }, $target);
}

sub _update_set_values {
  my ($self, $data) = @_;

  return @{ $self->render_aqt(
    $self->_expand_update_set_values(undef, $data),
  ) };
}

sub _expand_update_set_values {
  my ($self, undef, $data) = @_;
  $self->expand_expr({ -list => [
    map {
      my ($k, $set) = @$_;
      $set = { -bind => $_ } unless defined $set;
      +{ -op => [ '=', { -ident => $k }, $set ] };
    }
    map {
      my $k = $_;
      my $v = $data->{$k};
      (ref($v) eq 'ARRAY'
        ? ($self->{array_datatypes}
            ? [ $k, +{ -bind => [ $k, $v ] } ]
            : [ $k, +{ -literal => $v } ])
        : do {
            local our $Cur_Col_Meta = $k;
            [ $k, $self->_expand_expr($v) ]
          }
      );
    } sort keys %$data
  ] });
}

sub _expand_update_clause_target {
  my ($self, undef, $target) = @_;
  +(target => $self->expand_expr({ -list => $target }, -ident));
}

sub _expand_update_clause_set {
  return $_[2] if ref($_[2]) eq 'HASH' and ($_[2]->{-op}||[''])->[0] eq ',';
  +(set => $_[0]->_expand_update_set_values($_[1], $_[2]));
}

sub _expand_update_clause_where {
  +(where => $_[0]->expand_expr($_[2]));
}

sub _expand_update_clause_returning {
  +(returning => $_[0]->expand_expr({ -list => $_[2] }, -ident));
}

# So that subclasses can override UPDATE ... RETURNING separately from
# INSERT and DELETE
sub _update_returning { shift->_returning(@_) }



#======================================================================
# SELECT
#======================================================================

sub select {
  my ($self, @args) = @_;
  my $stmt = do {
    if (ref(my $sel = $args[0]) eq 'HASH') {
      $sel
    } else {
      my %clauses;
      @clauses{qw(from select where order_by)} = @args;

      # This oddity is to literalify since historically SQLA doesn't quote
      # a single identifier argument, so we convert it into a literal

      $clauses{select} = { -literal => [ $clauses{select}||'*' ] }
        unless ref($clauses{select});
      \%clauses;
    }
  };

  my @rendered = $self->render_statement({ -select => $stmt });
  return wantarray ? @rendered : $rendered[0];
}

sub _expand_select_clause_select {
  my ($self, undef, $select) = @_;
  +(select => $self->expand_expr({ -list => $select }, -ident));
}

sub _expand_select_clause_from {
  my ($self, undef, $from) = @_;
  +(from => $self->expand_expr({ -list => $from }, -ident));
}

sub _expand_select_clause_where {
  my ($self, undef, $where) = @_;

  my $sqla = do {
    if (my $conv = $self->{convert}) {
      my $_wrap = sub {
        my $orig = shift;
        sub {
          my $self = shift;
          +{ -func => [
            $conv,
            $self->$orig(@_)
          ] };
        };
      };
      $self->clone
           ->wrap_expander(bind => $_wrap)
           ->wrap_op_expanders(map +($_ => $_wrap), qw(ident value))
           ->wrap_expander(func => sub {
               my $orig = shift;
               sub {
                 my ($self, $type, $thing) = @_;
                 if (ref($thing) eq 'ARRAY' and $thing->[0] eq $conv
                     and @$thing == 2 and ref($thing->[1]) eq 'HASH'
                     and (
                       $thing->[1]{-ident}
                       or $thing->[1]{-value}
                       or $thing->[1]{-bind})
                     ) {
                   return { -func => $thing }; # already went through our expander
                 }
                 return $self->$orig($type, $thing);
               }
             });
    } else {
      $self;
    }
  };

  return +(where => $sqla->expand_expr($where));
}

sub _expand_select_clause_order_by {
  my ($self, undef, $order_by) = @_;
  +(order_by => $self->_expand_order_by($order_by));
}

sub _select_fields {
  my ($self, $fields) = @_;
  return $fields unless ref($fields);
  my ($sql, @bind) = @{ $self->render_aqt(
    $self->expand_expr({ -list => $fields }, '-ident')
  ) };
  return wantarray ? ($sql, @bind) : $sql;
}

#======================================================================
# DELETE
#======================================================================

sub delete {
  my ($self, $table, $where, $options) = @_;

  my $stmt = do {
    if (ref($table) eq 'HASH') {
      $table;
    } else {
      my %clauses = (target => $table, where => $where, %{$options||{}});
      \%clauses;
    }
  };
  my @rendered = $self->render_statement({ -delete => $stmt });
  return wantarray ? @rendered : $rendered[0];
}

# So that subclasses can override DELETE ... RETURNING separately from
# INSERT and UPDATE
sub _delete_returning { shift->_returning(@_) }

sub _expand_delete_clause_target {
  +(target => $_[0]->expand_expr({ -list => $_[2] }, -ident));
}

sub _expand_delete_clause_where { +(where => $_[0]->expand_expr($_[2])); }

sub _expand_delete_clause_returning {
  +(returning => $_[0]->expand_expr({ -list => $_[2] }, -ident));
}

sub _render_delete_clause_target {
   my ($self, undef, $from) = @_;
   $self->join_query_parts(' ', { -keyword => 'delete from' }, $from);
}

#======================================================================
# WHERE: entry point
#======================================================================



# Finally, a separate routine just to handle WHERE clauses
sub where {
  my ($self, $where, $order) = @_;

  local $self->{convert_where} = $self->{convert};

  # where ?
  my ($sql, @bind) = defined($where)
   ? $self->_recurse_where($where)
   : (undef);
  $sql = (defined $sql and length $sql) ? $self->_sqlcase(' where ') . "( $sql )" : '';

  # order by?
  if ($order) {
    my ($order_sql, @order_bind) = $self->_order_by($order);
    $sql .= $order_sql;
    push @bind, @order_bind;
  }

  return wantarray ? ($sql, @bind) : $sql;
}

{ our $Default_Scalar_To = -value }

sub expand_expr {
  my ($self, $expr, $default_scalar_to) = @_;
  local our $Default_Scalar_To = $default_scalar_to if $default_scalar_to;
  $self->_expand_expr($expr);
}

sub render_aqt {
  my ($self, $aqt, $top_level) = @_;
  my ($k, $v, @rest) = %$aqt;
  die "No" if @rest;
  die "Not a node type: $k" unless $k =~ s/^-//;
  if (my $meth = $self->{render}{$k}) {
    local our $Render_Top_Level = $top_level;
    return $self->$meth($k, $v)||[];
  }
  die "notreached: $k";
}

sub render_expr {
  my ($self, $expr, $default_scalar_to) = @_;
  return @{ $self->render_aqt(
    $self->expand_expr($expr, $default_scalar_to)
  ) };
}

sub render_statement {
  my ($self, $expr, $default_scalar_to) = @_;
  @{$self->render_aqt(
    $self->expand_expr($expr, $default_scalar_to), 1
  )};
}

sub _expand_statement {
  my ($self, $type, $args) = @_;
  my $ec = $self->{expand_clause};
  if ($args->{_}) {
    $args = { %$args };
    $args->{$type} = delete $args->{_}
  }
  my %has_clause = map +($_ => 1), @{$self->{clauses_of}{$type}};
  return +{ "-${type}" => +{
    map {
      my $val = $args->{$_};
      if (defined($val) and my $exp = $ec->{"${type}.$_"}) {
        if ((my (@exp) = $self->$exp($_ => $val)) == 1) {
          ($_ => $exp[0])
        } else {
          @exp
        }
      } elsif ($has_clause{$_}) {
        ($_ => $self->expand_expr($val))
      } else {
        ($_ => $val)
      }
    } sort keys %$args
  } };
}

sub _render_statement {
  my ($self, $type, $args) = @_;
  my @parts;
  foreach my $clause (@{$self->{clauses_of}{$type}}) {
    next unless my $clause_expr = $args->{$clause};
    my $part = do {
      if (my $rdr = $self->{render_clause}{"${type}.${clause}"}) {
        $self->$rdr($clause, $clause_expr, $args);
      } else {
        my $r = $self->render_aqt($clause_expr, 1);
        next unless defined $r->[0] and length $r->[0];
        $self->join_query_parts(' ',
          { -keyword => $clause },
          $r
        );
      }
    };
    push @parts, $part;
  }
  my $q = $self->join_query_parts(' ', @parts);
  return $self->join_query_parts('',
    (our $Render_Top_Level ? $q : ('(', $q, ')'))
  );
}

sub _normalize_op {
  my ($self, $raw) = @_;
  my $op = lc $raw;
  return $op if grep $_->{$op}, @{$self}{qw(expand_op render_op)};
  s/^-(?=.)//, s/\s+/_/g for $op;
  $op;
}

sub _expand_expr {
  my ($self, $expr) = @_;
  our $Expand_Depth ||= 0; local $Expand_Depth = $Expand_Depth + 1;
  return undef unless defined($expr);
  if (ref($expr) eq 'HASH') {
    return undef unless my $kc = keys %$expr;
    if ($kc > 1) {
      return $self->_expand_logop(and => $expr);
    }
    my ($key, $value) = %$expr;
    if ($key =~ /^-/ and $key =~ s/ [_\s]? \d+ $//x ) {
      belch 'Use of [and|or|nest]_N modifiers is deprecated and will be removed in SQLA v2.0. '
          . "You probably wanted ...-and => [ $key => COND1, $key => COND2 ... ]";
    }
    return $self->_expand_hashpair($key, $value);
  }
  if (ref($expr) eq 'ARRAY') {
    return $self->_expand_logop(lc($self->{logic}), $expr);
  }
  if (my $literal = is_literal_value($expr)) {
    return +{ -literal => $literal };
  }
  if (!ref($expr) or Scalar::Util::blessed($expr)) {
    return $self->_expand_scalar($expr);
  }
  die "notreached";
}

sub _expand_hashpair {
  my ($self, $k, $v) = @_;
  unless (defined($k) and length($k)) {
    if (defined($k) and my $literal = is_literal_value($v)) {
      belch 'Hash-pairs consisting of an empty string with a literal are deprecated, and will be removed in 2.0: use -and => [ $literal ] instead';
      return { -literal => $literal };
    }
    puke "Supplying an empty left hand side argument is not supported";
  }
  if ($k =~ /^-./) {
    return $self->_expand_hashpair_op($k, $v);
  } elsif ($k =~ /^\W+$/) {
    my ($lhs, @rhs) = ref($v) eq 'ARRAY' ? @$v : $v;
    return $self->_expand_op(
      -op, [ $k, $self->expand_expr($lhs, -ident), @rhs ]
    );
  }
  return $self->_expand_hashpair_ident($k, $v);
}

sub _expand_hashpair_ident {
  my ($self, $k, $v) = @_;

  local our $Cur_Col_Meta = $k;

  # hash with multiple or no elements is andor

  if (ref($v) eq 'HASH' and keys %$v != 1) {
    return $self->_expand_logop(and => $v, $k);
  }

  # undef needs to be re-sent with cmp to achieve IS/IS NOT NULL

  if (is_undef_value($v)) {
    return $self->_expand_hashpair_cmp($k => undef);
  }

  # scalars and objects get expanded as whatever requested or values

  if (!ref($v) or Scalar::Util::blessed($v)) {
    return $self->_expand_hashpair_scalar($k, $v);
  }

  # single key hashref is a hashtriple

  if (ref($v) eq 'HASH') {
    return $self->_expand_hashtriple($k, %$v);
  }

  # arrayref needs re-engineering over the elements

  if (ref($v) eq 'ARRAY') {
    return $self->sqlfalse unless @$v;
    $self->_debug("ARRAY($k) means distribute over elements");
    my $logic = lc(
      ($v->[0]||'') =~ /^-(and|or)$/i
        ? (shift(@{$v = [ @$v ]}), $1)
        : lc($self->{logic} || 'OR')
    );
    return $self->_expand_logop(
      $logic => $v, $k
    );
  }

  if (my $literal = is_literal_value($v)) {
    unless (length $k) {
      belch 'Hash-pairs consisting of an empty string with a literal are deprecated, and will be removed in 2.0: use -and => [ $literal ] instead';
      return \$literal;
    }
    my ($sql, @bind) = @$literal;
    if ($self->{bindtype} eq 'columns') {
      for (@bind) {
        $self->_assert_bindval_matches_bindtype($_);
      }
    }
    return +{ -literal => [ $self->_quote($k).' '.$sql, @bind ] };
  }
  die "notreached";
}

sub _expand_scalar {
  my ($self, $expr) = @_;

  return $self->_expand_expr({ (our $Default_Scalar_To) => $expr });
}

sub _expand_hashpair_scalar {
  my ($self, $k, $v) = @_;

  return $self->_expand_hashpair_cmp(
    $k, $self->_expand_scalar($v),
  );
}

sub _expand_hashpair_op {
  my ($self, $k, $v) = @_;

  $self->_assert_pass_injection_guard($k =~ /\A-(.*)\Z/s);

  my $op = $self->_normalize_op($k);

  my $wsop = join(' ', split '_', $op);

  my $is_special = List::Util::first { $wsop =~ $_->{regex} }
                     @{$self->{special_ops}};

  { # Old SQLA compat

    # the old special op system requires illegality for top-level use

    if (
      (our $Expand_Depth) == 1
      and (
        $is_special
        or (
          $self->{disable_old_special_ops}
          and $wsop =~ $BUILTIN_SPECIAL_OPS_re
        )
      )
    ) {
      puke "Illegal use of top-level '-$wsop'"
    }
  }

  if (my $exp = $self->{expand}{$op}||$self->{expand_op}{$op}) {
    return $self->$exp($op, $v);
  }

  if ($self->{render}{$op}) {
    return { "-${op}" => $v };
  }

  # Ops prefixed with -not_ get converted

  if (my ($rest) = $op =~/^not_(.*)$/) {
    return +{ -op => [
      'not',
      $self->_expand_expr({ "-${rest}", $v })
    ] };
  }

  { # Old SQLA compat

    # the old unary op system means we should touch nothing and let it work

    my $op = join(' ', split '_', $op);

    if (my $us = List::Util::first { $op =~ $_->{regex} } @{$self->{unary_ops}}) {
      return { -op => [ $op, $v ] };
    }
  }

  my $type = $is_special || $self->{render_op}{$op} ? -op : -func;

  if ($self->{restore_old_unop_handling}) {

    # Old SQLA compat

    if (
      ref($v) eq 'HASH'
      and keys %$v == 1
      and (keys %$v)[0] =~ /^-/
      and not $self->{render_op}{$op}
      and not $is_special
    ) {
      $type = -func;
    } else {
      $type = -op;
    }
  }

  if ($type eq -func and ref($v) eq 'ARRAY') {
    return $self->_expand_expr({ -func => [ $op, @$v ] });
  }

  return $self->_expand_expr({ $type => [ $op, $v ] });
}

sub _expand_hashpair_cmp {
  my ($self, $k, $v) = @_;
  $self->_expand_hashtriple($k, $self->{cmp}, $v);
}

sub _expand_hashtriple {
  my ($self, $k, $vk, $vv) = @_;

  my $ik = $self->_expand_expr({ -ident => $k });

  my $op = $self->_normalize_op($vk);
  $self->_assert_pass_injection_guard($op);

  if ($op =~ s/ _? \d+ $//x ) {
    return $self->_expand_expr($k, { $vk, $vv });
  }
  if (my $x = $self->{expand_op}{$op}) {
    local our $Cur_Col_Meta = $k;
    return $self->$x($op, $vv, $k);
  }
  { # Old SQLA compat

    my $op = join(' ', split '_', $op);

    if (my $us = List::Util::first { $op =~ $_->{regex} } @{$self->{special_ops}}) {
      return { -op => [ $op, $ik, $vv ] };
    }
    if (my $us = List::Util::first { $op =~ $_->{regex} } @{$self->{unary_ops}}) {
      return { -op => [
        $self->{cmp},
        $ik,
        { -op => [ $op, $vv ] }
      ] };
    }
  }
  if (ref($vv) eq 'ARRAY') {
    my @raw = @$vv;
    my $logic = (defined($raw[0]) and $raw[0] =~ /^-(and|or)$/i)
      ? (shift(@raw), lc $1) : 'or';
    my @values = map +{ $vk => $_ }, @raw;
    if (
      $op =~ $self->{inequality_op}
      or $op =~ $self->{not_like_op}
    ) {
      if (lc($logic) eq 'or' and @values > 1) {
        belch "A multi-element arrayref as an argument to the inequality op '${\uc(join ' ', split '_', $op)}' "
            . 'is technically equivalent to an always-true 1=1 (you probably wanted '
            . "to say ...{ \$inequality_op => [ -and => \@values ] }... instead)"
        ;
      }
    }
    unless (@values) {
      # try to DWIM on equality operators
      return ($self->_dwim_op_to_is($op,
        "Supplying an empty arrayref to '%s' is deprecated",
        "operator '%s' applied on an empty array (field '$k')"
      ) ? $self->sqlfalse : $self->sqltrue);
    }
    return $self->_expand_logop($logic => \@values, $k);
  }
  if (is_undef_value($vv)) {
    my $is = ($self->_dwim_op_to_is($op,
      "Supplying an undefined argument to '%s' is deprecated",
      "unexpected operator '%s' with undef operand",
    ) ? 'is' : 'is not');

    return $self->_expand_hashpair($k => { $is, undef });
  }
  local our $Cur_Col_Meta = $k;
  return +{ -op => [
    $op,
    $ik,
    $self->_expand_expr($vv)
  ] };
}

sub _dwim_op_to_is {
  my ($self, $raw, $empty, $fail) = @_;

  my $op = $self->_normalize_op($raw);

  if ($op =~ /^not$/i) {
    return 0;
  }
  if ($op =~ $self->{equality_op}) {
    return 1;
  }
  if ($op =~ $self->{like_op}) {
    belch(sprintf $empty, uc(join ' ', split '_', $op));
    return 1;
  }
  if ($op =~ $self->{inequality_op}) {
    return 0;
  }
  if ($op =~ $self->{not_like_op}) {
    belch(sprintf $empty, uc(join ' ', split '_', $op));
    return 0;
  }
  puke(sprintf $fail, $op);
}

sub _expand_func {
  my ($self, undef, $args) = @_;
  my ($func, @args) = @$args;
  return +{ -func => [ $func, map $self->expand_expr($_), @args ] };
}

sub _expand_ident {
  my ($self, undef, $body) = @_;
  unless (defined($body) or (ref($body) and ref($body) eq 'ARRAY')) {
    puke "-ident requires a single plain scalar argument (a quotable identifier) or an arrayref of identifier parts";
  }
  my ($sep) = map +(defined() ? $_ : '.') , $self->{name_sep};
  my @parts = map +($sep
                     ? map split(/\Q${sep}\E/, $_), @$_
                     : @$_
                   ), ref($body) ? $body : [ $body ];
  return { -ident => $parts[-1] } if $self->{_dequalify_idents};
  unless ($self->{quote_char}) {
    $self->_assert_pass_injection_guard($_) for @parts;
  }
  return +{ -ident => \@parts };
}

sub _expand_value {
  +{ -bind => [ our $Cur_Col_Meta, $_[2] ] };
}

sub _expand_row {
  my ($self, undef, $args) = @_;
  +{ -row => [ map $self->expand_expr($_), @$args ] };
}

sub _expand_op {
  my ($self, undef, $args) = @_;
  my ($op, @opargs) = @$args;
  if (my $exp = $self->{expand_op}{$op}) {
    return $self->$exp($op, \@opargs);
  }
  if (List::Util::first { $op =~ $_->{regex} } @{$self->{unary_ops}}) {
    return { -op => [ $op, @opargs ] };
  }
  +{ -op => [ $op, map $self->expand_expr($_), @opargs ] };
}

sub _expand_bool {
  my ($self, undef, $v) = @_;
  if (ref($v)) {
    return $self->_expand_expr($v);
  }
  puke "-bool => undef not supported" unless defined($v);
  return $self->_expand_expr({ -ident => $v });
}

sub _expand_list {
  my ($self, undef, $expr) = @_;
  return { -op => [
    ',', map $self->expand_expr($_),
          @{$expr->{-op}}[1..$#{$expr->{-op}}]
  ] } if ref($expr) eq 'HASH' and ($expr->{-op}||[''])->[0] eq ',';
  return +{ -op => [ ',',
    map $self->expand_expr($_),
      ref($expr) eq 'ARRAY' ? @$expr : $expr
  ] };
}

sub _expand_logop {
  my ($self, $logop, $v, $k) = @_;
  $self->${\$self->{expand_op}{$logop}}($logop, $v, $k);
}

sub _expand_op_andor {
  my ($self, $logop, $v, $k) = @_;
  if (defined $k) {
    $v = [ map +{ $k, $_ },
             (ref($v) eq 'HASH')
              ? (map +{ $_ => $v->{$_} }, sort keys %$v)
              : @$v,
         ];
  }
  if (ref($v) eq 'HASH') {
    return undef unless keys %$v;
    return +{ -op => [
      $logop,
      map $self->_expand_expr({ $_ => $v->{$_} }),
        sort keys %$v
    ] };
  }
  if (ref($v) eq 'ARRAY') {
    $logop eq 'and' or $logop eq 'or' or puke "unknown logic: $logop";

    my @expr = grep {
      (ref($_) eq 'ARRAY' and @$_)
      or (ref($_) eq 'HASH' and %$_)
      or 1
    } @$v;

    my @res;

    while (my ($el) = splice @expr, 0, 1) {
      puke "Supplying an empty left hand side argument is not supported in array-pairs"
        unless defined($el) and length($el);
      my $elref = ref($el);
      if (!$elref) {
        local our $Expand_Depth = 0;
        push(@res, grep defined, $self->_expand_expr({ $el, shift(@expr) }));
      } elsif ($elref eq 'ARRAY') {
        push(@res, grep defined, $self->_expand_expr($el)) if @$el;
      } elsif (my $l = is_literal_value($el)) {
        push @res, { -literal => $l };
      } elsif ($elref eq 'HASH') {
        local our $Expand_Depth = 0;
        push @res, grep defined, $self->_expand_expr($el) if %$el;
      } else {
        die "notreached";
      }
    }
    # ???
    # return $res[0] if @res == 1;
    return { -op => [ $logop, @res ] };
  }
  die "notreached";
}

sub _expand_op_is {
  my ($self, $op, $vv, $k) = @_;
  ($k, $vv) = @$vv unless defined $k;
  puke "$op can only take undef as argument"
    if defined($vv)
       and not (
         ref($vv) eq 'HASH'
         and exists($vv->{-value})
         and !defined($vv->{-value})
       );
  return +{ -op => [ $op.'_null', $self->expand_expr($k, -ident) ] };
}

sub _expand_between {
  my ($self, $op, $vv, $k) = @_;
  my @rhs = map $self->_expand_expr($_),
              ref($vv) eq 'ARRAY' ? @$vv : $vv;
  unless (
    (@rhs == 1 and ref($rhs[0]) eq 'HASH' and $rhs[0]->{-literal})
    or
    (@rhs == 2 and defined($rhs[0]) and defined($rhs[1]))
  ) {
    puke "Operator '${\uc($op)}' requires either an arrayref with two defined values or expressions, or a single literal scalarref/arrayref-ref";
  }
  return +{ -op => [
    $op,
    $self->expand_expr($k),
    map $self->expand_expr($_, -value), @rhs
  ] }
}

sub _expand_in {
  my ($self, $op, $vv, $k) = @_;
  if (my $literal = is_literal_value($vv)) {
    my ($sql, @bind) = @$literal;
    my $opened_sql = $self->_open_outer_paren($sql);
    return +{ -op => [
      $op, $self->expand_expr($k, -ident),
      { -literal => [ $opened_sql, @bind ] }
    ] };
  }
  my $undef_err =
    'SQL::Abstract before v1.75 used to generate incorrect SQL when the '
  . "-${\uc($op)} operator was given an undef-containing list: !!!AUDIT YOUR CODE "
  . 'AND DATA!!! (the upcoming Data::Query-based version of SQL::Abstract '
  . 'will emit the logically correct SQL instead of raising this exception)'
  ;
  puke("Argument passed to the '${\uc($op)}' operator can not be undefined")
    if !defined($vv);
  my @rhs = map $self->expand_expr($_, -value),
              map { defined($_) ? $_: puke($undef_err) }
                (ref($vv) eq 'ARRAY' ? @$vv : $vv);
  return $self->${\($op =~ /^not/ ? 'sqltrue' : 'sqlfalse')} unless @rhs;

  return +{ -op => [
    $op,
    $self->expand_expr($k, -ident),
    @rhs
  ] };
}

sub _expand_nest {
  my ($self, undef, $v) = @_;
  # DBIx::Class requires a nest warning to be emitted once but the private
  # method it overrode to do so no longer exists
  if ($self->{warn_once_on_nest}) {
    unless (our $Nest_Warned) {
      belch(
        "-nest in search conditions is deprecated, you most probably wanted:\n"
        .q|{..., -and => [ \%cond0, \@cond1, \'cond2', \[ 'cond3', [ col => bind ] ], etc. ], ... }|
      );
      $Nest_Warned = 1;
    }
  }
  return $self->_expand_expr($v);
}

sub _expand_values {
  my ($self, undef, $values) = @_;
  return { -values => [
    map +(
      ref($_) eq 'HASH'
        ? $self->expand_expr($_)
        : +{ -row => [ map $self->expand_expr($_), @$_ ] }
    ), ref($values) eq 'ARRAY' ? @$values : $values
  ] };
}

sub _recurse_where {
  my ($self, $where) = @_;

  # Special case: top level simple string treated as literal

  my $where_exp = (ref($where)
                    ? $self->_expand_select_clause_where(undef, $where)
                    : { -literal => [ $where ] });

  # dispatch expanded expression

  my ($sql, @bind) = defined($where_exp) ? @{ $self->render_aqt($where_exp) || [] } : ();
  # DBIx::Class used to call _recurse_where in scalar context
  # something else might too...
  if (wantarray) {
    return ($sql, @bind);
  }
  else {
    belch "Calling _recurse_where in scalar context is deprecated and will go away before 2.0";
    return $sql;
  }
}

sub _render_ident {
  my ($self, undef, $ident) = @_;

  return [ $self->_quote($ident) ];
}

sub _render_row {
  my ($self, undef, $values) = @_;
  return $self->join_query_parts('',
    '(',
    $self->_render_op(undef, [ ',', @$values ]),
    ')'
  );
}

sub _render_func {
  my ($self, undef, $rest) = @_;
  my ($func, @args) = @$rest;
  return $self->join_query_parts('',
    $self->_sqlcase($func),
    $self->join_query_parts('',
      '(',
      $self->join_query_parts(', ', @args),
      ')'
    ),
  );
}

sub _render_bind {
  my ($self, undef, $bind) = @_;
  return [ '?', $self->_bindtype(@$bind) ];
}

sub _render_literal {
  my ($self, undef, $literal) = @_;
  $self->_assert_bindval_matches_bindtype(@{$literal}[1..$#$literal]);
  return $literal;
}

sub _render_keyword {
  my ($self, undef, $keyword) = @_;
  return [ $self->_sqlcase(
    ref($keyword) ? $$keyword : join ' ', split '_', $keyword
  ) ];
}

sub _render_op {
  my ($self, undef, $v) = @_;
  my ($op, @args) = @$v;
  if (my $r = $self->{render_op}{$op}) {
    return $self->$r($op, \@args);
  }

  { # Old SQLA compat

    my $op = join(' ', split '_', $op);

    my $ss = List::Util::first { $op =~ $_->{regex} } @{$self->{special_ops}};
    if ($ss and @args > 1) {
      puke "Special op '${op}' requires first value to be identifier"
        unless my ($ident) = map $_->{-ident}, grep ref($_) eq 'HASH', $args[0];
      my $k = join(($self->{name_sep}||'.'), @$ident);
      local our $Expand_Depth = 1;
      return [ $self->${\($ss->{handler})}($k, $op, $args[1]) ];
    }
    if (my $us = List::Util::first { $op =~ $_->{regex} } @{$self->{unary_ops}}) {
      return [ $self->${\($us->{handler})}($op, $args[0]) ];
    }
    if ($ss) {
      return $self->_render_unop_paren($op, \@args);
    }
  }
  if (@args == 1) {
    return $self->_render_unop_prefix($op, \@args);
  } else {
    return $self->_render_op_multop($op, \@args);
  }
  die "notreached";
}


sub _render_op_between {
  my ($self, $op, $args) = @_;
  my ($left, $low, $high) = @$args;
  my @rh = do {
    if (@$args == 2) {
      puke "Single arg to between must be a literal"
        unless $low->{-literal};
      $low;
    } else {
      +($low, { -keyword => 'and' }, $high);
    }
  };
  return $self->join_query_parts(' ',
    '(', $left, { -keyword => $op }, @rh, ')',
  );
}

sub _render_op_in {
  my ($self, $op, $args) = @_;
  my ($lhs, @rhs) = @$args;

  return $self->join_query_parts(' ',
    $lhs,
    { -keyword => $op },
    $self->join_query_parts(' ',
      '(',
      $self->join_query_parts(', ', @rhs),
      ')'
    ),
  );
}

sub _render_op_andor {
  my ($self, $op, $args) = @_;
  return undef unless @$args;
  return $self->join_query_parts('', $args->[0]) if @$args == 1;
  my $inner = $self->_render_op_multop($op, $args);
  return undef unless defined($inner->[0]) and length($inner->[0]);
  return $self->join_query_parts(' ',
    '(', $inner, ')'
  );
}

sub _render_op_multop {
  my ($self, $op, $args) = @_;
  my @parts = @$args;
  return undef unless @parts;
  return $self->render_aqt($parts[0]) if @parts == 1;
  my $join = ($op eq ','
                ? ', '
                : { -keyword => " ${op} " }
             );
  return $self->join_query_parts($join, @parts);
}

sub _render_values {
  my ($self, undef, $values) = @_;
  my $inner = $self->join_query_parts(' ',
    { -keyword => 'values' },
    $self->join_query_parts(', ',
      ref($values) eq 'ARRAY' ? @$values : $values
    ),
  );
  return $self->join_query_parts('',
    (our $Render_Top_Level ? $inner : ('(', $inner, ')'))
  );
}

sub join_query_parts {
  my ($self, $join, @parts) = @_;
  if (ref($join) eq 'HASH') {
    $join = $self->render_aqt($join)->[0];
  }
  my @final = map +(
    ref($_) eq 'HASH'
      ? $self->render_aqt($_)
      : ((ref($_) eq 'ARRAY') ? $_ : [ $_ ])
  ), @parts;
  return [
    $self->{join_sql_parts}->(
      $join, grep defined && length, map $_->[0], @final
    ),
    (map @{$_}[1..$#$_], @final),
  ];
}

sub _render_unop_paren {
  my ($self, $op, $v) = @_;
  return $self->join_query_parts('',
    '(', $self->_render_unop_prefix($op, $v), ')'
  );
}

sub _render_unop_prefix {
  my ($self, $op, $v) = @_;
  my $op_sql = $self->{restore_old_unop_handling}
                 ? $self->_sqlcase($op)
                 : { -keyword => $op };
  return $self->join_query_parts(' ',
    ($self->{restore_old_unop_handling}
      ? $self->_sqlcase($op)
      : { -keyword => \$op }),
    $v->[0]
  );
}

sub _render_unop_postfix {
  my ($self, $op, $v) = @_;
  return $self->join_query_parts(' ',
    $v->[0], { -keyword => $op },
  );
}

# Some databases (SQLite) treat col IN (1, 2) different from
# col IN ( (1, 2) ). Use this to strip all outer parens while
# adding them back in the corresponding method
sub _open_outer_paren {
  my ($self, $sql) = @_;

  while (my ($inner) = $sql =~ /^ \s* \( (.*) \) \s* $/xs) {

    # there are closing parens inside, need the heavy duty machinery
    # to reevaluate the extraction starting from $sql (full reevaluation)
    if ($inner =~ /\)/) {
      require Text::Balanced;

      my (undef, $remainder) = do {
        # idiotic design - writes to $@ but *DOES NOT* throw exceptions
        local $@;
        Text::Balanced::extract_bracketed($sql, '()', qr/\s*/);
      };

      # the entire expression needs to be a balanced bracketed thing
      # (after an extract no remainder sans trailing space)
      last if defined $remainder and $remainder =~ /\S/;
    }

    $sql = $inner;
  }

  $sql;
}

sub _where_field_IN {
  my ($self, $k, $op, $vals) = @_;
  @{$self->_render_op_in(
    $op,
    [
      $self->expand_expr($k, -ident),
      map $self->expand_expr($_, -value),
        ref($vals) eq 'ARRAY' ? @$vals : $vals
    ]
  )};
}

sub _where_field_BETWEEN {
  my ($self, $k, $op, $vals) = @_;
  @{$self->_render_op_between(
    $op,
    [ $self->expand_expr($k, -ident), ref($vals) eq 'ARRAY' ? @$vals : $vals ]
  )};
}

#======================================================================
# ORDER BY
#======================================================================

sub _expand_order_by {
  my ($self, $arg) = @_;

  return unless defined($arg) and not (ref($arg) eq 'ARRAY' and !@$arg);

  return $self->expand_expr({ -list => $arg })
    if ref($arg) eq 'HASH' and ($arg->{-op}||[''])->[0] eq ',';

  my $expander = sub {
    my ($self, $dir, $expr) = @_;
    my @to_expand = ref($expr) eq 'ARRAY' ? @$expr : $expr;
    foreach my $arg (@to_expand) {
      if (
        ref($arg) eq 'HASH'
        and keys %$arg > 1
        and grep /^-(asc|desc)$/, keys %$arg
      ) {
        puke "ordering direction hash passed to order by must have exactly one key (-asc or -desc)";
      }
    }
    my @exp = map +(
                defined($dir) ? { -op => [ $dir =~ /^-?(.*)$/ ,=> $_ ] } : $_
              ),
                map $self->expand_expr($_, -ident),
                map ref($_) eq 'ARRAY' ? @$_ : $_, @to_expand;
    return undef unless @exp;
    return undef if @exp == 1 and not defined($exp[0]);
    return +{ -op => [ ',', @exp ] };
  };

  local @{$self->{expand}}{qw(asc desc)} = (($expander) x 2);

  return $self->$expander(undef, $arg);
}

sub _order_by {
  my ($self, $arg) = @_;

  return '' unless defined(my $expanded = $self->_expand_order_by($arg));

  my ($sql, @bind) = @{ $self->render_aqt($expanded) };

  return '' unless length($sql);

  my $final_sql = $self->_sqlcase(' order by ').$sql;

  return $final_sql unless wantarray;

  return ($final_sql, @bind);
}

# _order_by no longer needs to call this so doesn't but DBIC uses it.

sub _order_by_chunks {
  my ($self, $arg) = @_;

  return () unless defined(my $expanded = $self->_expand_order_by($arg));

  my @res = $self->_chunkify_order_by($expanded);
  (ref() ? $_->[0] : $_) .= '' for @res;
  return @res;
}

sub _chunkify_order_by {
  my ($self, $expanded) = @_;

  return grep length, @{ $self->render_aqt($expanded) }
    if $expanded->{-ident} or @{$expanded->{-literal}||[]} == 1;

  for ($expanded) {
    if (ref() eq 'HASH' and $_->{-op} and $_->{-op}[0] eq ',') {
      my ($comma, @list) = @{$_->{-op}};
      return map $self->_chunkify_order_by($_), @list;
    }
    return $self->render_aqt($_);
  }
}

#======================================================================
# DATASOURCE (FOR NOW, JUST PLAIN TABLE OR LIST OF TABLES)
#======================================================================

sub _table  {
  my $self = shift;
  my $from = shift;
  $self->render_aqt(
    $self->expand_expr({ -list => $from }, -ident)
  )->[0];
}


#======================================================================
# UTILITY FUNCTIONS
#======================================================================

# highly optimized, as it's called way too often
sub _quote {
  # my ($self, $label) = @_;

  return '' unless defined $_[1];
  return ${$_[1]} if ref($_[1]) eq 'SCALAR';
  puke 'Identifier cannot be hashref' if ref($_[1]) eq 'HASH';

  unless ($_[0]->{quote_char}) {
    if (ref($_[1]) eq 'ARRAY') {
      return join($_[0]->{name_sep}||'.', @{$_[1]});
    } else {
      $_[0]->_assert_pass_injection_guard($_[1]);
      return $_[1];
    }
  }

  my $qref = ref $_[0]->{quote_char};
  my ($l, $r) =
      !$qref             ? ($_[0]->{quote_char}, $_[0]->{quote_char})
    : ($qref eq 'ARRAY') ? @{$_[0]->{quote_char}}
    : puke "Unsupported quote_char format: $_[0]->{quote_char}";

  my $esc = $_[0]->{escape_char} || $r;

  # parts containing * are naturally unquoted
  return join(
    $_[0]->{name_sep}||'',
    map +(
      $_ eq '*'
        ? $_
        : do { (my $n = $_) =~ s/(\Q$esc\E|\Q$r\E)/$esc$1/g; $l . $n . $r }
    ),
    (ref($_[1]) eq 'ARRAY'
      ? @{$_[1]}
      : (
          $_[0]->{name_sep}
            ? split (/\Q$_[0]->{name_sep}\E/, $_[1] )
            : $_[1]
        )
    )
  );
}


# Conversion, if applicable
sub _convert {
  #my ($self, $arg) = @_;
  if (my $conv = $_[0]->{convert_where}) {
    return @{ $_[0]->join_query_parts('',
      $_[0]->_sqlcase($conv),
      '(' , $_[1] , ')'
    ) };
  }
  return $_[1];
}

# And bindtype
sub _bindtype {
  #my ($self, $col, @vals) = @_;
  # called often - tighten code
  return $_[0]->{bindtype} eq 'columns'
    ? map {[$_[1], $_]} @_[2 .. $#_]
    : @_[2 .. $#_]
  ;
}

# Dies if any element of @bind is not in [colname => value] format
# if bindtype is 'columns'.
sub _assert_bindval_matches_bindtype {
#  my ($self, @bind) = @_;
  my $self = shift;
  if ($self->{bindtype} eq 'columns') {
    for (@_) {
      if (!defined $_ || ref($_) ne 'ARRAY' || @$_ != 2) {
        puke "bindtype 'columns' selected, you need to pass: [column_name => bind_value]"
      }
    }
  }
}

# Fix SQL case, if so requested
sub _sqlcase {
  # LDNOTE: if $self->{case} is true, then it contains 'lower', so we
  # don't touch the argument ... crooked logic, but let's not change it!
  return $_[0]->{case} ? $_[1] : uc($_[1]);
}

#======================================================================
# DISPATCHING FROM REFKIND
#======================================================================

sub _refkind {
  my ($self, $data) = @_;

  return 'UNDEF' unless defined $data;

  # blessed objects are treated like scalars
  my $ref = (Scalar::Util::blessed $data) ? '' : ref $data;

  return 'SCALAR' unless $ref;

  my $n_steps = 1;
  while ($ref eq 'REF') {
    $data = $$data;
    $ref = (Scalar::Util::blessed $data) ? '' : ref $data;
    $n_steps++ if $ref;
  }

  return ($ref||'SCALAR') . ('REF' x $n_steps);
}

sub _try_refkind {
  my ($self, $data) = @_;
  my @try = ($self->_refkind($data));
  push @try, 'SCALAR_or_UNDEF' if $try[0] eq 'SCALAR' || $try[0] eq 'UNDEF';
  push @try, 'FALLBACK';
  return \@try;
}

sub _METHOD_FOR_refkind {
  my ($self, $meth_prefix, $data) = @_;

  my $method;
  for (@{$self->_try_refkind($data)}) {
    $method = $self->can($meth_prefix."_".$_)
      and last;
  }

  return $method || puke "cannot dispatch on '$meth_prefix' for ".$self->_refkind($data);
}


sub _SWITCH_refkind {
  my ($self, $data, $dispatch_table) = @_;

  my $coderef;
  for (@{$self->_try_refkind($data)}) {
    $coderef = $dispatch_table->{$_}
      and last;
  }

  puke "no dispatch entry for ".$self->_refkind($data)
    unless $coderef;

  $coderef->();
}




#======================================================================
# VALUES, GENERATE, AUTOLOAD
#======================================================================

# LDNOTE: original code from nwiger, didn't touch code in that section
# I feel the AUTOLOAD stuff should not be the default, it should
# only be activated on explicit demand by user.

sub values {
    my $self = shift;
    my $data = shift || return;
    puke "Argument to ", __PACKAGE__, "->values must be a \\%hash"
        unless ref $data eq 'HASH';

    my @all_bind;
    foreach my $k (sort keys %$data) {
        my $v = $data->{$k};
        $self->_SWITCH_refkind($v, {
          ARRAYREF => sub {
            if ($self->{array_datatypes}) { # array datatype
              push @all_bind, $self->_bindtype($k, $v);
            }
            else {                          # literal SQL with bind
              my ($sql, @bind) = @$v;
              $self->_assert_bindval_matches_bindtype(@bind);
              push @all_bind, @bind;
            }
          },
          ARRAYREFREF => sub { # literal SQL with bind
            my ($sql, @bind) = @${$v};
            $self->_assert_bindval_matches_bindtype(@bind);
            push @all_bind, @bind;
          },
          SCALARREF => sub {  # literal SQL without bind
          },
          SCALAR_or_UNDEF => sub {
            push @all_bind, $self->_bindtype($k, $v);
          },
        });
    }

    return @all_bind;
}

sub generate {
    my $self  = shift;

    my(@sql, @sqlq, @sqlv);

    for (@_) {
        my $ref = ref $_;
        if ($ref eq 'HASH') {
            for my $k (sort keys %$_) {
                my $v = $_->{$k};
                my $r = ref $v;
                my $label = $self->_quote($k);
                if ($r eq 'ARRAY') {
                    # literal SQL with bind
                    my ($sql, @bind) = @$v;
                    $self->_assert_bindval_matches_bindtype(@bind);
                    push @sqlq, "$label = $sql";
                    push @sqlv, @bind;
                } elsif ($r eq 'SCALAR') {
                    # literal SQL without bind
                    push @sqlq, "$label = $$v";
                } else {
                    push @sqlq, "$label = ?";
                    push @sqlv, $self->_bindtype($k, $v);
                }
            }
            push @sql, $self->_sqlcase('set'), join ', ', @sqlq;
        } elsif ($ref eq 'ARRAY') {
            # unlike insert(), assume these are ONLY the column names, i.e. for SQL
            for my $v (@$_) {
                my $r = ref $v;
                if ($r eq 'ARRAY') {   # literal SQL with bind
                    my ($sql, @bind) = @$v;
                    $self->_assert_bindval_matches_bindtype(@bind);
                    push @sqlq, $sql;
                    push @sqlv, @bind;
                } elsif ($r eq 'SCALAR') {  # literal SQL without bind
                    # embedded literal SQL
                    push @sqlq, $$v;
                } else {
                    push @sqlq, '?';
                    push @sqlv, $v;
                }
            }
            push @sql, '(' . join(', ', @sqlq) . ')';
        } elsif ($ref eq 'SCALAR') {
            # literal SQL
            push @sql, $$_;
        } else {
            # strings get case twiddled
            push @sql, $self->_sqlcase($_);
        }
    }

    my $sql = join ' ', @sql;

    # this is pretty tricky
    # if ask for an array, return ($stmt, @bind)
    # otherwise, s/?/shift @sqlv/ to put it inline
    if (wantarray) {
        return ($sql, @sqlv);
    } else {
        1 while $sql =~ s/\?/my $d = shift(@sqlv);
                             ref $d ? $d->[1] : $d/e;
        return $sql;
    }
}


sub DESTROY { 1 }

sub AUTOLOAD {
    # This allows us to check for a local, then _form, attr
    my $self = shift;
    my($name) = $AUTOLOAD =~ /.*::(.+)/;
    puke "AUTOLOAD invoked for method name ${name} and allow_autoload option not set" unless $self->{allow_autoload};
    return $self->generate($name, @_);
}

1;



__END__

=head1 NAME

SQL::Abstract - Generate SQL from Perl data structures

=head1 SYNOPSIS

    use SQL::Abstract;

    my $sql = SQL::Abstract->new;

    my($stmt, @bind) = $sql->select($source, \@fields, \%where, $order);

    my($stmt, @bind) = $sql->insert($table, \%fieldvals || \@values);

    my($stmt, @bind) = $sql->update($table, \%fieldvals, \%where);

    my($stmt, @bind) = $sql->delete($table, \%where);

    # Then, use these in your DBI statements
    my $sth = $dbh->prepare($stmt);
    $sth->execute(@bind);

    # Just generate the WHERE clause
    my($stmt, @bind) = $sql->where(\%where, $order);

    # Return values in the same order, for hashed queries
    # See PERFORMANCE section for more details
    my @bind = $sql->values(\%fieldvals);

=head1 DESCRIPTION

This module was inspired by the excellent L<DBIx::Abstract>.
However, in using that module I found that what I really wanted
to do was generate SQL, but still retain complete control over my
statement handles and use the DBI interface. So, I set out to
create an abstract SQL generation module.

While based on the concepts used by L<DBIx::Abstract>, there are
several important differences, especially when it comes to WHERE
clauses. I have modified the concepts used to make the SQL easier
to generate from Perl data structures and, IMO, more intuitive.
The underlying idea is for this module to do what you mean, based
on the data structures you provide it. The big advantage is that
you don't have to modify your code every time your data changes,
as this module figures it out.

To begin with, an SQL INSERT is as easy as just specifying a hash
of C<key=value> pairs:

    my %data = (
        name => 'Jimbo Bobson',
        phone => '123-456-7890',
        address => '42 Sister Lane',
        city => 'St. Louis',
        state => 'Louisiana',
    );

The SQL can then be generated with this:

    my($stmt, @bind) = $sql->insert('people', \%data);

Which would give you something like this:

    $stmt = "INSERT INTO people
                    (address, city, name, phone, state)
                    VALUES (?, ?, ?, ?, ?)";
    @bind = ('42 Sister Lane', 'St. Louis', 'Jimbo Bobson',
             '123-456-7890', 'Louisiana');

These are then used directly in your DBI code:

    my $sth = $dbh->prepare($stmt);
    $sth->execute(@bind);

=head2 Inserting and Updating Arrays

If your database has array types (like for example Postgres),
activate the special option C<< array_datatypes => 1 >>
when creating the C<SQL::Abstract> object.
Then you may use an arrayref to insert and update database array types:

    my $sql = SQL::Abstract->new(array_datatypes => 1);
    my %data = (
        planets => [qw/Mercury Venus Earth Mars/]
    );

    my($stmt, @bind) = $sql->insert('solar_system', \%data);

This results in:

    $stmt = "INSERT INTO solar_system (planets) VALUES (?)"

    @bind = (['Mercury', 'Venus', 'Earth', 'Mars']);


=head2 Inserting and Updating SQL

In order to apply SQL functions to elements of your C<%data> you may
specify a reference to an arrayref for the given hash value. For example,
if you need to execute the Oracle C<to_date> function on a value, you can
say something like this:

    my %data = (
        name => 'Bill',
        date_entered => \[ "to_date(?,'MM/DD/YYYY')", "03/02/2003" ],
    );

The first value in the array is the actual SQL. Any other values are
optional and would be included in the bind values array. This gives
you:

    my($stmt, @bind) = $sql->insert('people', \%data);

    $stmt = "INSERT INTO people (name, date_entered)
                VALUES (?, to_date(?,'MM/DD/YYYY'))";
    @bind = ('Bill', '03/02/2003');

An UPDATE is just as easy, all you change is the name of the function:

    my($stmt, @bind) = $sql->update('people', \%data);

Notice that your C<%data> isn't touched; the module will generate
the appropriately quirky SQL for you automatically. Usually you'll
want to specify a WHERE clause for your UPDATE, though, which is
where handling C<%where> hashes comes in handy...

=head2 Complex where statements

This module can generate pretty complicated WHERE statements
easily. For example, simple C<key=value> pairs are taken to mean
equality, and if you want to see if a field is within a set
of values, you can use an arrayref. Let's say we wanted to
SELECT some data based on this criteria:

    my %where = (
       requestor => 'inna',
       worker => ['nwiger', 'rcwe', 'sfz'],
       status => { '!=', 'completed' }
    );

    my($stmt, @bind) = $sql->select('tickets', '*', \%where);

The above would give you something like this:

    $stmt = "SELECT * FROM tickets WHERE
                ( requestor = ? ) AND ( status != ? )
                AND ( worker = ? OR worker = ? OR worker = ? )";
    @bind = ('inna', 'completed', 'nwiger', 'rcwe', 'sfz');

Which you could then use in DBI code like so:

    my $sth = $dbh->prepare($stmt);
    $sth->execute(@bind);

Easy, eh?

=head1 METHODS

The methods are simple. There's one for every major SQL operation,
and a constructor you use first. The arguments are specified in a
similar order for each method (table, then fields, then a where
clause) to try and simplify things.

=head2 new(option => 'value')

The C<new()> function takes a list of options and values, and returns
a new B<SQL::Abstract> object which can then be used to generate SQL
through the methods below. The options accepted are:

=over

=item case

If set to 'lower', then SQL will be generated in all lowercase. By
default SQL is generated in "textbook" case meaning something like:

    SELECT a_field FROM a_table WHERE some_field LIKE '%someval%'

Any setting other than 'lower' is ignored.

=item cmp

This determines what the default comparison operator is. By default
it is C<=>, meaning that a hash like this:

    %where = (name => 'nwiger', email => 'nate@wiger.org');

Will generate SQL like this:

    WHERE name = 'nwiger' AND email = 'nate@wiger.org'

However, you may want loose comparisons by default, so if you set
C<cmp> to C<like> you would get SQL such as:

    WHERE name like 'nwiger' AND email like 'nate@wiger.org'

You can also override the comparison on an individual basis - see
the huge section on L</"WHERE CLAUSES"> at the bottom.

=item sqltrue, sqlfalse

Expressions for inserting boolean values within SQL statements.
By default these are C<1=1> and C<1=0>. They are used
by the special operators C<-in> and C<-not_in> for generating
correct SQL even when the argument is an empty array (see below).

=item logic

This determines the default logical operator for multiple WHERE
statements in arrays or hashes. If absent, the default logic is "or"
for arrays, and "and" for hashes. This means that a WHERE
array of the form:

    @where = (
        event_date => {'>=', '2/13/99'},
        event_date => {'<=', '4/24/03'},
    );

will generate SQL like this:

    WHERE event_date >= '2/13/99' OR event_date <= '4/24/03'

This is probably not what you want given this query, though (look
at the dates). To change the "OR" to an "AND", simply specify:

    my $sql = SQL::Abstract->new(logic => 'and');

Which will change the above C<WHERE> to:

    WHERE event_date >= '2/13/99' AND event_date <= '4/24/03'

The logic can also be changed locally by inserting
a modifier in front of an arrayref:

    @where = (-and => [event_date => {'>=', '2/13/99'},
                       event_date => {'<=', '4/24/03'} ]);

See the L</"WHERE CLAUSES"> section for explanations.

=item convert

This will automatically convert comparisons using the specified SQL
function for both column and value. This is mostly used with an argument
of C<upper> or C<lower>, so that the SQL will have the effect of
case-insensitive "searches". For example, this:

    $sql = SQL::Abstract->new(convert => 'upper');
    %where = (keywords => 'MaKe iT CAse inSeNSItive');

Will turn out the following SQL:

    WHERE upper(keywords) like upper('MaKe iT CAse inSeNSItive')

The conversion can be C<upper()>, C<lower()>, or any other SQL function
that can be applied symmetrically to fields (actually B<SQL::Abstract> does
not validate this option; it will just pass through what you specify verbatim).

=item bindtype

This is a kludge because many databases suck. For example, you can't
just bind values using DBI's C<execute()> for Oracle C<CLOB> or C<BLOB> fields.
Instead, you have to use C<bind_param()>:

    $sth->bind_param(1, 'reg data');
    $sth->bind_param(2, $lots, {ora_type => ORA_CLOB});

The problem is, B<SQL::Abstract> will normally just return a C<@bind> array,
which loses track of which field each slot refers to. Fear not.

If you specify C<bindtype> in new, you can determine how C<@bind> is returned.
Currently, you can specify either C<normal> (default) or C<columns>. If you
specify C<columns>, you will get an array that looks like this:

    my $sql = SQL::Abstract->new(bindtype => 'columns');
    my($stmt, @bind) = $sql->insert(...);

    @bind = (
        [ 'column1', 'value1' ],
        [ 'column2', 'value2' ],
        [ 'column3', 'value3' ],
    );

You can then iterate through this manually, using DBI's C<bind_param()>.

    $sth->prepare($stmt);
    my $i = 1;
    for (@bind) {
        my($col, $data) = @$_;
        if ($col eq 'details' || $col eq 'comments') {
            $sth->bind_param($i, $data, {ora_type => ORA_CLOB});
        } elsif ($col eq 'image') {
            $sth->bind_param($i, $data, {ora_type => ORA_BLOB});
        } else {
            $sth->bind_param($i, $data);
        }
        $i++;
    }
    $sth->execute;      # execute without @bind now

Now, why would you still use B<SQL::Abstract> if you have to do this crap?
Basically, the advantage is still that you don't have to care which fields
are or are not included. You could wrap that above C<for> loop in a simple
sub called C<bind_fields()> or something and reuse it repeatedly. You still
get a layer of abstraction over manual SQL specification.

Note that if you set L</bindtype> to C<columns>, the C<\[ $sql, @bind ]>
construct (see L</Literal SQL with placeholders and bind values (subqueries)>)
will expect the bind values in this format.

=item quote_char

This is the character that a table or column name will be quoted
with.  By default this is an empty string, but you could set it to
the character C<`>, to generate SQL like this:

  SELECT `a_field` FROM `a_table` WHERE `some_field` LIKE '%someval%'

Alternatively, you can supply an array ref of two items, the first being the left
hand quote character, and the second the right hand quote character. For
example, you could supply C<['[',']']> for SQL Server 2000 compliant quotes
that generates SQL like this:

  SELECT [a_field] FROM [a_table] WHERE [some_field] LIKE '%someval%'

Quoting is useful if you have tables or columns names that are reserved
words in your database's SQL dialect.

=item escape_char

This is the character that will be used to escape L</quote_char>s appearing
in an identifier before it has been quoted.

The parameter default in case of a single L</quote_char> character is the quote
character itself.

When opening-closing-style quoting is used (L</quote_char> is an arrayref)
this parameter defaults to the B<closing (right)> L</quote_char>. Occurrences
of the B<opening (left)> L</quote_char> within the identifier are currently left
untouched. The default for opening-closing-style quotes may change in future
versions, thus you are B<strongly encouraged> to specify the escape character
explicitly.

=item name_sep

This is the character that separates a table and column name.  It is
necessary to specify this when the C<quote_char> option is selected,
so that tables and column names can be individually quoted like this:

  SELECT `table`.`one_field` FROM `table` WHERE `table`.`other_field` = 1

=item injection_guard

A regular expression C<qr/.../> that is applied to any C<-function> and unquoted
column name specified in a query structure. This is a safety mechanism to avoid
injection attacks when mishandling user input e.g.:

  my %condition_as_column_value_pairs = get_values_from_user();
  $sqla->select( ... , \%condition_as_column_value_pairs );

If the expression matches an exception is thrown. Note that literal SQL
supplied via C<\'...'> or C<\['...']> is B<not> checked in any way.

Defaults to checking for C<;> and the C<GO> keyword (TransactSQL)

=item array_datatypes

When this option is true, arrayrefs in INSERT or UPDATE are
interpreted as array datatypes and are passed directly
to the DBI layer.
When this option is false, arrayrefs are interpreted
as literal SQL, just like refs to arrayrefs
(but this behavior is for backwards compatibility; when writing
new queries, use the "reference to arrayref" syntax
for literal SQL).


=item special_ops

Takes a reference to a list of "special operators"
to extend the syntax understood by L<SQL::Abstract>.
See section L</"SPECIAL OPERATORS"> for details.

=item unary_ops

Takes a reference to a list of "unary operators"
to extend the syntax understood by L<SQL::Abstract>.
See section L</"UNARY OPERATORS"> for details.



=back

=head2 insert($table, \@values || \%fieldvals, \%options)

This is the simplest function. You simply give it a table name
and either an arrayref of values or hashref of field/value pairs.
It returns an SQL INSERT statement and a list of bind values.
See the sections on L</"Inserting and Updating Arrays"> and
L</"Inserting and Updating SQL"> for information on how to insert
with those data types.

The optional C<\%options> hash reference may contain additional
options to generate the insert SQL. Currently supported options
are:

=over 4

=item returning

Takes either a scalar of raw SQL fields, or an array reference of
field names, and adds on an SQL C<RETURNING> statement at the end.
This allows you to return data generated by the insert statement
(such as row IDs) without performing another C<SELECT> statement.
Note, however, this is not part of the SQL standard and may not
be supported by all database engines.

=back

=head2 update($table, \%fieldvals, \%where, \%options)

This takes a table, hashref of field/value pairs, and an optional
hashref L<WHERE clause|/WHERE CLAUSES>. It returns an SQL UPDATE function and a list
of bind values.
See the sections on L</"Inserting and Updating Arrays"> and
L</"Inserting and Updating SQL"> for information on how to insert
with those data types.

The optional C<\%options> hash reference may contain additional
options to generate the update SQL. Currently supported options
are:

=over 4

=item returning

See the C<returning> option to
L<insert|/insert($table, \@values || \%fieldvals, \%options)>.

=back

=head2 select($source, $fields, $where, $order)

This returns a SQL SELECT statement and associated list of bind values, as
specified by the arguments:

=over

=item $source

Specification of the 'FROM' part of the statement.
The argument can be either a plain scalar (interpreted as a table
name, will be quoted), or an arrayref (interpreted as a list
of table names, joined by commas, quoted), or a scalarref
(literal SQL, not quoted).

=item $fields

Specification of the list of fields to retrieve from
the source.
The argument can be either an arrayref (interpreted as a list
of field names, will be joined by commas and quoted), or a
plain scalar (literal SQL, not quoted).
Please observe that this API is not as flexible as that of
the first argument C<$source>, for backwards compatibility reasons.

=item $where

Optional argument to specify the WHERE part of the query.
The argument is most often a hashref, but can also be
an arrayref or plain scalar --
see section L<WHERE clause|/"WHERE CLAUSES"> for details.

=item $order

Optional argument to specify the ORDER BY part of the query.
The argument can be a scalar, a hashref or an arrayref
-- see section L<ORDER BY clause|/"ORDER BY CLAUSES">
for details.

=back


=head2 delete($table, \%where, \%options)

This takes a table name and optional hashref L<WHERE clause|/WHERE CLAUSES>.
It returns an SQL DELETE statement and list of bind values.

The optional C<\%options> hash reference may contain additional
options to generate the delete SQL. Currently supported options
are:

=over 4

=item returning

See the C<returning> option to
L<insert|/insert($table, \@values || \%fieldvals, \%options)>.

=back

=head2 where(\%where, $order)

This is used to generate just the WHERE clause. For example,
if you have an arbitrary data structure and know what the
rest of your SQL is going to look like, but want an easy way
to produce a WHERE clause, use this. It returns an SQL WHERE
clause and list of bind values.


=head2 values(\%data)

This just returns the values from the hash C<%data>, in the same
order that would be returned from any of the other above queries.
Using this allows you to markedly speed up your queries if you
are affecting lots of rows. See below under the L</"PERFORMANCE"> section.

=head2 generate($any, 'number', $of, \@data, $struct, \%types)

Warning: This is an experimental method and subject to change.

This returns arbitrarily generated SQL. It's a really basic shortcut.
It will return two different things, depending on return context:

    my($stmt, @bind) = $sql->generate('create table', \$table, \@fields);
    my $stmt_and_val = $sql->generate('create table', \$table, \@fields);

These would return the following:

    # First calling form
    $stmt = "CREATE TABLE test (?, ?)";
    @bind = (field1, field2);

    # Second calling form
    $stmt_and_val = "CREATE TABLE test (field1, field2)";

Depending on what you're trying to do, it's up to you to choose the correct
format. In this example, the second form is what you would want.

By the same token:

    $sql->generate('alter session', { nls_date_format => 'MM/YY' });

Might give you:

    ALTER SESSION SET nls_date_format = 'MM/YY'

You get the idea. Strings get their case twiddled, but everything
else remains verbatim.

=head1 EXPORTABLE FUNCTIONS

=head2 is_plain_value

Determines if the supplied argument is a plain value as understood by this
module:

=over

=item * The value is C<undef>

=item * The value is a non-reference

=item * The value is an object with stringification overloading

=item * The value is of the form C<< { -value => $anything } >>

=back

On failure returns C<undef>, on success returns a B<scalar> reference
to the original supplied argument.

=over

=item * Note

The stringification overloading detection is rather advanced: it takes
into consideration not only the presence of a C<""> overload, but if that
fails also checks for enabled
L<autogenerated versions of C<"">|overload/Magic Autogeneration>, based
on either C<0+> or C<bool>.

Unfortunately testing in the field indicates that this
detection B<< may tickle a latent bug in perl versions before 5.018 >>,
but only when very large numbers of stringifying objects are involved.
At the time of writing ( Sep 2014 ) there is no clear explanation of
the direct cause, nor is there a manageably small test case that reliably
reproduces the problem.

If you encounter any of the following exceptions in B<random places within
your application stack> - this module may be to blame:

  Operation "ne": no method found,
    left argument in overloaded package <something>,
    right argument in overloaded package <something>

or perhaps even

  Stub found while resolving method "???" overloading """" in package <something>

If you fall victim to the above - please attempt to reduce the problem
to something that could be sent to the L<SQL::Abstract developers
|DBIx::Class/GETTING HELP/SUPPORT>
(either publicly or privately). As a workaround in the meantime you can
set C<$ENV{SQLA_ISVALUE_IGNORE_AUTOGENERATED_STRINGIFICATION}> to a true
value, which will most likely eliminate your problem (at the expense of
not being able to properly detect exotic forms of stringification).

This notice and environment variable will be removed in a future version,
as soon as the underlying problem is found and a reliable workaround is
devised.

=back

=head2 is_literal_value

Determines if the supplied argument is a literal value as understood by this
module:

=over

=item * C<\$sql_string>

=item * C<\[ $sql_string, @bind_values ]>

=back

On failure returns C<undef>, on success returns an B<array> reference
containing the unpacked version of the supplied literal SQL and bind values.

=head2 is_undef_value

Tests for undef, whether expanded or not.

=head1 WHERE CLAUSES

=head2 Introduction

This module uses a variation on the idea from L<DBIx::Abstract>. It
is B<NOT>, repeat I<not> 100% compatible. B<The main logic of this
module is that things in arrays are OR'ed, and things in hashes
are AND'ed.>

The easiest way to explain is to show lots of examples. After
each C<%where> hash shown, it is assumed you used:

    my($stmt, @bind) = $sql->where(\%where);

However, note that the C<%where> hash can be used directly in any
of the other functions as well, as described above.

=head2 Key-value pairs

So, let's get started. To begin, a simple hash:

    my %where  = (
        user   => 'nwiger',
        status => 'completed'
    );

Is converted to SQL C<key = val> statements:

    $stmt = "WHERE user = ? AND status = ?";
    @bind = ('nwiger', 'completed');

One common thing I end up doing is having a list of values that
a field can be in. To do this, simply specify a list inside of
an arrayref:

    my %where  = (
        user   => 'nwiger',
        status => ['assigned', 'in-progress', 'pending'];
    );

This simple code will create the following:

    $stmt = "WHERE user = ? AND ( status = ? OR status = ? OR status = ? )";
    @bind = ('nwiger', 'assigned', 'in-progress', 'pending');

A field associated to an empty arrayref will be considered a
logical false and will generate 0=1.

=head2 Tests for NULL values

If the value part is C<undef> then this is converted to SQL <IS NULL>

    my %where  = (
        user   => 'nwiger',
        status => undef,
    );

becomes:

    $stmt = "WHERE user = ? AND status IS NULL";
    @bind = ('nwiger');

To test if a column IS NOT NULL:

    my %where  = (
        user   => 'nwiger',
        status => { '!=', undef },
    );

=head2 Specific comparison operators

If you want to specify a different type of operator for your comparison,
you can use a hashref for a given column:

    my %where  = (
        user   => 'nwiger',
        status => { '!=', 'completed' }
    );

Which would generate:

    $stmt = "WHERE user = ? AND status != ?";
    @bind = ('nwiger', 'completed');

To test against multiple values, just enclose the values in an arrayref:

    status => { '=', ['assigned', 'in-progress', 'pending'] };

Which would give you:

    "WHERE status = ? OR status = ? OR status = ?"


The hashref can also contain multiple pairs, in which case it is expanded
into an C<AND> of its elements:

    my %where  = (
        user   => 'nwiger',
        status => { '!=', 'completed', -not_like => 'pending%' }
    );

    # Or more dynamically, like from a form
    $where{user} = 'nwiger';
    $where{status}{'!='} = 'completed';
    $where{status}{'-not_like'} = 'pending%';

    # Both generate this
    $stmt = "WHERE user = ? AND status != ? AND status NOT LIKE ?";
    @bind = ('nwiger', 'completed', 'pending%');


To get an OR instead, you can combine it with the arrayref idea:

    my %where => (
         user => 'nwiger',
         priority => [ { '=', 2 }, { '>', 5 } ]
    );

Which would generate:

    $stmt = "WHERE ( priority = ? OR priority > ? ) AND user = ?";
    @bind = ('2', '5', 'nwiger');

If you want to include literal SQL (with or without bind values), just use a
scalar reference or reference to an arrayref as the value:

    my %where  = (
        date_entered => { '>' => \["to_date(?, 'MM/DD/YYYY')", "11/26/2008"] },
        date_expires => { '<' => \"now()" }
    );

Which would generate:

    $stmt = "WHERE date_entered > to_date(?, 'MM/DD/YYYY') AND date_expires < now()";
    @bind = ('11/26/2008');


=head2 Logic and nesting operators

In the example above,
there is a subtle trap if you want to say something like
this (notice the C<AND>):

    WHERE priority != ? AND priority != ?

Because, in Perl you I<can't> do this:

    priority => { '!=' => 2, '!=' => 1 }

As the second C<!=> key will obliterate the first. The solution
is to use the special C<-modifier> form inside an arrayref:

    priority => [ -and => {'!=', 2},
                          {'!=', 1} ]


Normally, these would be joined by C<OR>, but the modifier tells it
to use C<AND> instead. (Hint: You can use this in conjunction with the
C<logic> option to C<new()> in order to change the way your queries
work by default.) B<Important:> Note that the C<-modifier> goes
B<INSIDE> the arrayref, as an extra first element. This will
B<NOT> do what you think it might:

    priority => -and => [{'!=', 2}, {'!=', 1}]   # WRONG!

Here is a quick list of equivalencies, since there is some overlap:

    # Same
    status => {'!=', 'completed', 'not like', 'pending%' }
    status => [ -and => {'!=', 'completed'}, {'not like', 'pending%'}]

    # Same
    status => {'=', ['assigned', 'in-progress']}
    status => [ -or => {'=', 'assigned'}, {'=', 'in-progress'}]
    status => [ {'=', 'assigned'}, {'=', 'in-progress'} ]



=head2 Special operators: IN, BETWEEN, etc.

You can also use the hashref format to compare a list of fields using the
C<IN> comparison operator, by specifying the list as an arrayref:

    my %where  = (
        status   => 'completed',
        reportid => { -in => [567, 2335, 2] }
    );

Which would generate:

    $stmt = "WHERE status = ? AND reportid IN (?,?,?)";
    @bind = ('completed', '567', '2335', '2');

The reverse operator C<-not_in> generates SQL C<NOT IN> and is used in
the same way.

If the argument to C<-in> is an empty array, 'sqlfalse' is generated
(by default: C<1=0>). Similarly, C<< -not_in => [] >> generates
'sqltrue' (by default: C<1=1>).

In addition to the array you can supply a chunk of literal sql or
literal sql with bind:

    my %where = {
      customer => { -in => \[
        'SELECT cust_id FROM cust WHERE balance > ?',
        2000,
      ],
      status => { -in => \'SELECT status_codes FROM states' },
    };

would generate:

    $stmt = "WHERE (
          customer IN ( SELECT cust_id FROM cust WHERE balance > ? )
      AND status IN ( SELECT status_codes FROM states )
    )";
    @bind = ('2000');

Finally, if the argument to C<-in> is not a reference, it will be
treated as a single-element array.

Another pair of operators is C<-between> and C<-not_between>,
used with an arrayref of two values:

    my %where  = (
        user   => 'nwiger',
        completion_date => {
           -not_between => ['2002-10-01', '2003-02-06']
        }
    );

Would give you:

    WHERE user = ? AND completion_date NOT BETWEEN ( ? AND ? )

Just like with C<-in> all plausible combinations of literal SQL
are possible:

    my %where = {
      start0 => { -between => [ 1, 2 ] },
      start1 => { -between => \["? AND ?", 1, 2] },
      start2 => { -between => \"lower(x) AND upper(y)" },
      start3 => { -between => [
        \"lower(x)",
        \["upper(?)", 'stuff' ],
      ] },
    };

Would give you:

    $stmt = "WHERE (
          ( start0 BETWEEN ? AND ?                )
      AND ( start1 BETWEEN ? AND ?                )
      AND ( start2 BETWEEN lower(x) AND upper(y)  )
      AND ( start3 BETWEEN lower(x) AND upper(?)  )
    )";
    @bind = (1, 2, 1, 2, 'stuff');


These are the two builtin "special operators"; but the
list can be expanded: see section L</"SPECIAL OPERATORS"> below.

=head2 Unary operators: bool

If you wish to test against boolean columns or functions within your
database you can use the C<-bool> and C<-not_bool> operators. For
example to test the column C<is_user> being true and the column
C<is_enabled> being false you would use:-

    my %where  = (
        -bool       => 'is_user',
        -not_bool   => 'is_enabled',
    );

Would give you:

    WHERE is_user AND NOT is_enabled

If a more complex combination is required, testing more conditions,
then you should use the and/or operators:-

    my %where  = (
        -and           => [
            -bool      => 'one',
            -not_bool  => { two=> { -rlike => 'bar' } },
            -not_bool  => { three => [ { '=', 2 }, { '>', 5 } ] },
        ],
    );

Would give you:

    WHERE
      one
        AND
      (NOT two RLIKE ?)
        AND
      (NOT ( three = ? OR three > ? ))


=head2 Nested conditions, -and/-or prefixes

So far, we've seen how multiple conditions are joined with a top-level
C<AND>.  We can change this by putting the different conditions we want in
hashes and then putting those hashes in an array. For example:

    my @where = (
        {
            user   => 'nwiger',
            status => { -like => ['pending%', 'dispatched'] },
        },
        {
            user   => 'robot',
            status => 'unassigned',
        }
    );

This data structure would create the following:

    $stmt = "WHERE ( user = ? AND ( status LIKE ? OR status LIKE ? ) )
                OR ( user = ? AND status = ? ) )";
    @bind = ('nwiger', 'pending', 'dispatched', 'robot', 'unassigned');


Clauses in hashrefs or arrayrefs can be prefixed with an C<-and> or C<-or>
to change the logic inside:

    my @where = (
         -and => [
            user => 'nwiger',
            [
                -and => [ workhrs => {'>', 20}, geo => 'ASIA' ],
                -or => { workhrs => {'<', 50}, geo => 'EURO' },
            ],
        ],
    );

That would yield:

    $stmt = "WHERE ( user = ?
               AND ( ( workhrs > ? AND geo = ? )
                  OR ( workhrs < ? OR geo = ? ) ) )";
    @bind = ('nwiger', '20', 'ASIA', '50', 'EURO');

=head3 Algebraic inconsistency, for historical reasons

C<Important note>: when connecting several conditions, the C<-and->|C<-or>
operator goes C<outside> of the nested structure; whereas when connecting
several constraints on one column, the C<-and> operator goes
C<inside> the arrayref. Here is an example combining both features:

   my @where = (
     -and => [a => 1, b => 2],
     -or  => [c => 3, d => 4],
      e   => [-and => {-like => 'foo%'}, {-like => '%bar'} ]
   )

yielding

  WHERE ( (    ( a = ? AND b = ? )
            OR ( c = ? OR d = ? )
            OR ( e LIKE ? AND e LIKE ? ) ) )

This difference in syntax is unfortunate but must be preserved for
historical reasons. So be careful: the two examples below would
seem algebraically equivalent, but they are not

  { col => [ -and =>
    { -like => 'foo%' },
    { -like => '%bar' },
  ] }
  # yields: WHERE ( ( col LIKE ? AND col LIKE ? ) )

  [ -and =>
    { col => { -like => 'foo%' } },
    { col => { -like => '%bar' } },
  ]
  # yields: WHERE ( ( col LIKE ? OR col LIKE ? ) )


=head2 Literal SQL and value type operators

The basic premise of SQL::Abstract is that in WHERE specifications the "left
side" is a column name and the "right side" is a value (normally rendered as
a placeholder). This holds true for both hashrefs and arrayref pairs as you
see in the L</WHERE CLAUSES> examples above. Sometimes it is necessary to
alter this behavior. There are several ways of doing so.

=head3 -ident

This is a virtual operator that signals the string to its right side is an
identifier (a column name) and not a value. For example to compare two
columns you would write:

    my %where = (
        priority => { '<', 2 },
        requestor => { -ident => 'submitter' },
    );

which creates:

    $stmt = "WHERE priority < ? AND requestor = submitter";
    @bind = ('2');

If you are maintaining legacy code you may see a different construct as
described in L</Deprecated usage of Literal SQL>, please use C<-ident> in new
code.

=head3 -value

This is a virtual operator that signals that the construct to its right side
is a value to be passed to DBI. This is for example necessary when you want
to write a where clause against an array (for RDBMS that support such
datatypes). For example:

    my %where = (
        array => { -value => [1, 2, 3] }
    );

will result in:

    $stmt = 'WHERE array = ?';
    @bind = ([1, 2, 3]);

Note that if you were to simply say:

    my %where = (
        array => [1, 2, 3]
    );

the result would probably not be what you wanted:

    $stmt = 'WHERE array = ? OR array = ? OR array = ?';
    @bind = (1, 2, 3);

=head3 Literal SQL

Finally, sometimes only literal SQL will do. To include a random snippet
of SQL verbatim, you specify it as a scalar reference. Consider this only
as a last resort. Usually there is a better way. For example:

    my %where = (
        priority => { '<', 2 },
        requestor => { -in => \'(SELECT name FROM hitmen)' },
    );

Would create:

    $stmt = "WHERE priority < ? AND requestor IN (SELECT name FROM hitmen)"
    @bind = (2);

Note that in this example, you only get one bind parameter back, since
the verbatim SQL is passed as part of the statement.

=head4 CAVEAT

  Never use untrusted input as a literal SQL argument - this is a massive
  security risk (there is no way to check literal snippets for SQL
  injections and other nastyness). If you need to deal with untrusted input
  use literal SQL with placeholders as described next.

=head3 Literal SQL with placeholders and bind values (subqueries)

If the literal SQL to be inserted has placeholders and bind values,
use a reference to an arrayref (yes this is a double reference --
not so common, but perfectly legal Perl). For example, to find a date
in Postgres you can use something like this:

    my %where = (
       date_column => \[ "= date '2008-09-30' - ?::integer", 10 ]
    )

This would create:

    $stmt = "WHERE ( date_column = date '2008-09-30' - ?::integer )"
    @bind = ('10');

Note that you must pass the bind values in the same format as they are returned
by L<where|/where(\%where, $order)>. This means that if you set L</bindtype>
to C<columns>, you must provide the bind values in the
C<< [ column_meta => value ] >> format, where C<column_meta> is an opaque
scalar value; most commonly the column name, but you can use any scalar value
(including references and blessed references), L<SQL::Abstract> will simply
pass it through intact. So if C<bindtype> is set to C<columns> the above
example will look like:

    my %where = (
       date_column => \[ "= date '2008-09-30' - ?::integer", [ {} => 10 ] ]
    )

Literal SQL is especially useful for nesting parenthesized clauses in the
main SQL query. Here is a first example:

  my ($sub_stmt, @sub_bind) = ("SELECT c1 FROM t1 WHERE c2 < ? AND c3 LIKE ?",
                               100, "foo%");
  my %where = (
    foo => 1234,
    bar => \["IN ($sub_stmt)" => @sub_bind],
  );

This yields:

  $stmt = "WHERE (foo = ? AND bar IN (SELECT c1 FROM t1
                                             WHERE c2 < ? AND c3 LIKE ?))";
  @bind = (1234, 100, "foo%");

Other subquery operators, like for example C<"E<gt> ALL"> or C<"NOT IN">,
are expressed in the same way. Of course the C<$sub_stmt> and
its associated bind values can be generated through a former call
to C<select()> :

  my ($sub_stmt, @sub_bind)
     = $sql->select("t1", "c1", {c2 => {"<" => 100},
                                 c3 => {-like => "foo%"}});
  my %where = (
    foo => 1234,
    bar => \["> ALL ($sub_stmt)" => @sub_bind],
  );

In the examples above, the subquery was used as an operator on a column;
but the same principle also applies for a clause within the main C<%where>
hash, like an EXISTS subquery:

  my ($sub_stmt, @sub_bind)
     = $sql->select("t1", "*", {c1 => 1, c2 => \"> t0.c0"});
  my %where = ( -and => [
    foo   => 1234,
    \["EXISTS ($sub_stmt)" => @sub_bind],
  ]);

which yields

  $stmt = "WHERE (foo = ? AND EXISTS (SELECT * FROM t1
                                        WHERE c1 = ? AND c2 > t0.c0))";
  @bind = (1234, 1);


Observe that the condition on C<c2> in the subquery refers to
column C<t0.c0> of the main query: this is I<not> a bind
value, so we have to express it through a scalar ref.
Writing C<< c2 => {">" => "t0.c0"} >> would have generated
C<< c2 > ? >> with bind value C<"t0.c0"> ... not exactly
what we wanted here.

Finally, here is an example where a subquery is used
for expressing unary negation:

  my ($sub_stmt, @sub_bind)
     = $sql->where({age => [{"<" => 10}, {">" => 20}]});
  $sub_stmt =~ s/^ where //i; # don't want "WHERE" in the subclause
  my %where = (
        lname  => {like => '%son%'},
        \["NOT ($sub_stmt)" => @sub_bind],
    );

This yields

  $stmt = "lname LIKE ? AND NOT ( age < ? OR age > ? )"
  @bind = ('%son%', 10, 20)

=head3 Deprecated usage of Literal SQL

Below are some examples of archaic use of literal SQL. It is shown only as
reference for those who deal with legacy code. Each example has a much
better, cleaner and safer alternative that users should opt for in new code.

=over

=item *

    my %where = ( requestor => \'IS NOT NULL' )

    $stmt = "WHERE requestor IS NOT NULL"

This used to be the way of generating NULL comparisons, before the handling
of C<undef> got formalized. For new code please use the superior syntax as
described in L</Tests for NULL values>.

=item *

    my %where = ( requestor => \'= submitter' )

    $stmt = "WHERE requestor = submitter"

This used to be the only way to compare columns. Use the superior L</-ident>
method for all new code. For example an identifier declared in such a way
will be properly quoted if L</quote_char> is properly set, while the legacy
form will remain as supplied.

=item *

    my %where = ( is_ready  => \"", completed => { '>', '2012-12-21' } )

    $stmt = "WHERE completed > ? AND is_ready"
    @bind = ('2012-12-21')

Using an empty string literal used to be the only way to express a boolean.
For all new code please use the much more readable
L<-bool|/Unary operators: bool> operator.

=back

=head2 Conclusion

These pages could go on for a while, since the nesting of the data
structures this module can handle are pretty much unlimited (the
module implements the C<WHERE> expansion as a recursive function
internally). Your best bet is to "play around" with the module a
little to see how the data structures behave, and choose the best
format for your data based on that.

And of course, all the values above will probably be replaced with
variables gotten from forms or the command line. After all, if you
knew everything ahead of time, you wouldn't have to worry about
dynamically-generating SQL and could just hardwire it into your
script.

=head1 ORDER BY CLAUSES

Some functions take an order by clause. This can either be a scalar (just a
column name), a hashref of C<< { -desc => 'col' } >> or C<< { -asc => 'col' }
>>, a scalarref, an arrayref-ref, or an arrayref of any of the previous
forms. Examples:

               Given              |         Will Generate
    ---------------------------------------------------------------
                                  |
    'colA'                        | ORDER BY colA
                                  |
    [qw/colA colB/]               | ORDER BY colA, colB
                                  |
    {-asc  => 'colA'}             | ORDER BY colA ASC
                                  |
    {-desc => 'colB'}             | ORDER BY colB DESC
                                  |
    ['colA', {-asc => 'colB'}]    | ORDER BY colA, colB ASC
                                  |
    { -asc => [qw/colA colB/] }   | ORDER BY colA ASC, colB ASC
                                  |
    \'colA DESC'                  | ORDER BY colA DESC
                                  |
    \[ 'FUNC(colA, ?)', $x ]      | ORDER BY FUNC(colA, ?)
                                  |   /* ...with $x bound to ? */
                                  |
    [                             | ORDER BY
      { -asc => 'colA' },         |     colA ASC,
      { -desc => [qw/colB/] },    |     colB DESC,
      { -asc => [qw/colC colD/] },|     colC ASC, colD ASC,
      \'colE DESC',               |     colE DESC,
      \[ 'FUNC(colF, ?)', $x ],   |     FUNC(colF, ?)
    ]                             |   /* ...with $x bound to ? */
    ===============================================================



=head1 OLD EXTENSION SYSTEM

=head2 SPECIAL OPERATORS

  my $sqlmaker = SQL::Abstract->new(special_ops => [
     {
      regex => qr/.../,
      handler => sub {
        my ($self, $field, $op, $arg) = @_;
        ...
      },
     },
     {
      regex => qr/.../,
      handler => 'method_name',
     },
   ]);

A "special operator" is a SQL syntactic clause that can be
applied to a field, instead of a usual binary operator.
For example:

   WHERE field IN (?, ?, ?)
   WHERE field BETWEEN ? AND ?
   WHERE MATCH(field) AGAINST (?, ?)

Special operators IN and BETWEEN are fairly standard and therefore
are builtin within C<SQL::Abstract> (as the overridable methods
C<_where_field_IN> and C<_where_field_BETWEEN>). For other operators,
like the MATCH .. AGAINST example above which is specific to MySQL,
you can write your own operator handlers - supply a C<special_ops>
argument to the C<new> method. That argument takes an arrayref of
operator definitions; each operator definition is a hashref with two
entries:

=over

=item regex

the regular expression to match the operator

=item handler

Either a coderef or a plain scalar method name. In both cases
the expected return is C<< ($sql, @bind) >>.

When supplied with a method name, it is simply called on the
L<SQL::Abstract> object as:

 $self->$method_name($field, $op, $arg)

 Where:

  $field is the LHS of the operator
  $op is the part that matched the handler regex
  $arg is the RHS

When supplied with a coderef, it is called as:

 $coderef->($self, $field, $op, $arg)


=back

For example, here is an implementation
of the MATCH .. AGAINST syntax for MySQL

  my $sqlmaker = SQL::Abstract->new(special_ops => [

    # special op for MySql MATCH (field) AGAINST(word1, word2, ...)
    {regex => qr/^match$/i,
     handler => sub {
       my ($self, $field, $op, $arg) = @_;
       $arg = [$arg] if not ref $arg;
       my $label         = $self->_quote($field);
       my ($placeholder) = $self->_convert('?');
       my $placeholders  = join ", ", (($placeholder) x @$arg);
       my $sql           = $self->_sqlcase('match') . " ($label) "
                         . $self->_sqlcase('against') . " ($placeholders) ";
       my @bind = $self->_bindtype($field, @$arg);
       return ($sql, @bind);
       }
     },

  ]);


=head2 UNARY OPERATORS

  my $sqlmaker = SQL::Abstract->new(unary_ops => [
     {
      regex => qr/.../,
      handler => sub {
        my ($self, $op, $arg) = @_;
        ...
      },
     },
     {
      regex => qr/.../,
      handler => 'method_name',
     },
   ]);

A "unary operator" is a SQL syntactic clause that can be
applied to a field - the operator goes before the field

You can write your own operator handlers - supply a C<unary_ops>
argument to the C<new> method. That argument takes an arrayref of
operator definitions; each operator definition is a hashref with two
entries:

=over

=item regex

the regular expression to match the operator

=item handler

Either a coderef or a plain scalar method name. In both cases
the expected return is C<< $sql >>.

When supplied with a method name, it is simply called on the
L<SQL::Abstract> object as:

 $self->$method_name($op, $arg)

 Where:

  $op is the part that matched the handler regex
  $arg is the RHS or argument of the operator

When supplied with a coderef, it is called as:

 $coderef->($self, $op, $arg)


=back

=head1 NEW METHODS (EXPERIMENTAL)

See L<SQL::Abstract::Reference> for the C<expr> versus C<aqt> concept and
an explanation of what the below extensions are extending.

=head2 plugin

  $sqla->plugin('+Foo');

Enables plugin SQL::Abstract::Plugin::Foo.

=head2 render_expr

  my ($sql, @bind) = $sqla->render_expr($expr);

=head2 render_statement

Use this if you may be rendering a top level statement so e.g. a SELECT
query doesn't get wrapped in parens

  my ($sql, @bind) = $sqla->render_statement($expr);

=head2 expand_expr

Expression expansion with optional default for scalars.

  my $aqt = $self->expand_expr($expr);
  my $aqt = $self->expand_expr($expr, -ident);

=head2 render_aqt

Top level means avoid parens on statement AQT.

  my $res = $self->render_aqt($aqt, $top_level);
  my ($sql, @bind) = @$res;

=head2 join_query_parts

Similar to join() but will render hashrefs as nodes for both join and parts,
and treats arrayref as a nested C<[ $join, @parts ]> structure.

  my $part = $self->join_query_parts($join, @parts);

=head1 NEW EXTENSION SYSTEM

=head2 clone

  my $sqla2 = $sqla->clone;

Performs a semi-shallow copy such that extension methods won't leak state
but excessive depth is avoided.

=head2 expander

=head2 expanders

=head2 op_expander

=head2 op_expanders

=head2 clause_expander

=head2 clause_expanders

  $sqla->expander('name' => sub { ... });
  $sqla->expanders('name1' => sub { ... }, 'name2' => sub { ... });

=head2 expander_list

=head2 op_expander_list

=head2 clause_expander_list

  my @names = $sqla->expander_list;

=head2 wrap_expander

=head2 wrap_expanders

=head2 wrap_op_expander

=head2 wrap_op_expanders

=head2 wrap_clause_expander

=head2 wrap_clause_expanders

  $sqla->wrap_expander('name' => sub { my ($orig) = @_; sub { ... } });
  $sqla->wrap_expanders(
    'name1' => sub { my ($orig1) = @_; sub { ... } },
    'name2' => sub { my ($orig2) = @_; sub { ... } },
  );

=head2 renderer

=head2 renderers

=head2 op_renderer

=head2 op_renderers

=head2 clause_renderer

=head2 clause_renderers

  $sqla->renderer('name' => sub { ... });
  $sqla->renderers('name1' => sub { ... }, 'name2' => sub { ... });

=head2 renderer_list

=head2 op_renderer_list

=head2 clause_renderer_list

  my @names = $sqla->renderer_list;

=head2 wrap_renderer

=head2 wrap_renderers

=head2 wrap_op_renderer

=head2 wrap_op_renderers

=head2 wrap_clause_renderer

=head2 wrap_clause_renderers

  $sqla->wrap_renderer('name' => sub { my ($orig) = @_; sub { ... } });
  $sqla->wrap_renderers(
    'name1' => sub { my ($orig1) = @_; sub { ... } },
    'name2' => sub { my ($orig2) = @_; sub { ... } },
  );

=head2 clauses_of

  my @clauses = $sqla->clauses_of('select');
  $sqla->clauses_of(select => \@new_clauses);
  $sqla->clauses_of(select => sub {
    my (undef, @old_clauses) = @_;
    ...
    return @new_clauses;
  });

=head2 statement_list

  my @list = $sqla->statement_list;

=head2 make_unop_expander

  my $exp = $sqla->make_unop_expander(sub { ... });

If the op is found as a binop, assumes it wants a default comparison, so
the inner expander sub can reliably operate as

  sub { my ($self, $name, $body) = @_; ... }

=head2 make_binop_expander

  my $exp = $sqla->make_binop_expander(sub { ... });

If the op is found as a unop, assumes the value will be an arrayref with the
LHS as the first entry, and converts that to an ident node if it's a simple
scalar. So the inner expander sub looks like

  sub {
    my ($self, $name, $body, $k) = @_;
    { -blah => [ map $self->expand_expr($_), $k, $body ] }
  }

=head2 unop_expander

=head2 unop_expanders

=head2 binop_expander

=head2 binop_expanders

The above methods operate exactly like the op_ versions but wrap the coderef
using the appropriate make_ method first.

=head1 PERFORMANCE

Thanks to some benchmarking by Mark Stosberg, it turns out that
this module is many orders of magnitude faster than using C<DBIx::Abstract>.
I must admit this wasn't an intentional design issue, but it's a
byproduct of the fact that you get to control your C<DBI> handles
yourself.

To maximize performance, use a code snippet like the following:

    # prepare a statement handle using the first row
    # and then reuse it for the rest of the rows
    my($sth, $stmt);
    for my $href (@array_of_hashrefs) {
        $stmt ||= $sql->insert('table', $href);
        $sth  ||= $dbh->prepare($stmt);
        $sth->execute($sql->values($href));
    }

The reason this works is because the keys in your C<$href> are sorted
internally by B<SQL::Abstract>. Thus, as long as your data retains
the same structure, you only have to generate the SQL the first time
around. On subsequent queries, simply use the C<values> function provided
by this module to return your values in the correct order.

However this depends on the values having the same type - if, for
example, the values of a where clause may either have values
(resulting in sql of the form C<column = ?> with a single bind
value), or alternatively the values might be C<undef> (resulting in
sql of the form C<column IS NULL> with no bind value) then the
caching technique suggested will not work.

=head1 FORMBUILDER

If you use my C<CGI::FormBuilder> module at all, you'll hopefully
really like this part (I do, at least). Building up a complex query
can be as simple as the following:

    #!/usr/bin/perl

    use warnings;
    use strict;

    use CGI::FormBuilder;
    use SQL::Abstract;

    my $form = CGI::FormBuilder->new(...);
    my $sql  = SQL::Abstract->new;

    if ($form->submitted) {
        my $field = $form->field;
        my $id = delete $field->{id};
        my($stmt, @bind) = $sql->update('table', $field, {id => $id});
    }

Of course, you would still have to connect using C<DBI> to run the
query, but the point is that if you make your form look like your
table, the actual query script can be extremely simplistic.

If you're B<REALLY> lazy (I am), check out C<HTML::QuickTable> for
a fast interface to returning and formatting data. I frequently
use these three modules together to write complex database query
apps in under 50 lines.

=head1 HOW TO CONTRIBUTE

Contributions are always welcome, in all usable forms (we especially
welcome documentation improvements). The delivery methods include git-
or unified-diff formatted patches, GitHub pull requests, or plain bug
reports either via RT or the Mailing list. Contributors are generally
granted full access to the official repository after their first several
patches pass successful review.

This project is maintained in a git repository. The code and related tools are
accessible at the following locations:

=over

=item * Official repo: L<git://git.shadowcat.co.uk/dbsrgits/SQL-Abstract.git>

=item * Official gitweb: L<http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=dbsrgits/SQL-Abstract.git>

=item * GitHub mirror: L<https://github.com/dbsrgits/sql-abstract>

=item * Authorized committers: L<ssh://dbsrgits@git.shadowcat.co.uk/SQL-Abstract.git>

=back

=head1 CHANGES

Version 1.50 was a major internal refactoring of C<SQL::Abstract>.
Great care has been taken to preserve the I<published> behavior
documented in previous versions in the 1.* family; however,
some features that were previously undocumented, or behaved
differently from the documentation, had to be changed in order
to clarify the semantics. Hence, client code that was relying
on some dark areas of C<SQL::Abstract> v1.*
B<might behave differently> in v1.50.

The main changes are:

=over

=item *

support for literal SQL through the C<< \ [ $sql, @bind ] >> syntax.

=item *

support for the { operator => \"..." } construct (to embed literal SQL)

=item *

support for the { operator => \["...", @bind] } construct (to embed literal SQL with bind values)

=item *

optional support for L<array datatypes|/"Inserting and Updating Arrays">

=item *

defensive programming: check arguments

=item *

fixed bug with global logic, which was previously implemented
through global variables yielding side-effects. Prior versions would
interpret C<< [ {cond1, cond2}, [cond3, cond4] ] >>
as C<< "(cond1 AND cond2) OR (cond3 AND cond4)" >>.
Now this is interpreted
as C<< "(cond1 AND cond2) OR (cond3 OR cond4)" >>.


=item *

fixed semantics of  _bindtype on array args

=item *

dropped the C<_anoncopy> of the %where tree. No longer necessary,
we just avoid shifting arrays within that tree.

=item *

dropped the C<_modlogic> function

=back

=head1 ACKNOWLEDGEMENTS

There are a number of individuals that have really helped out with
this module. Unfortunately, most of them submitted bugs via CPAN
so I have no idea who they are! But the people I do know are:

    Ash Berlin (order_by hash term support)
    Matt Trout (DBIx::Class support)
    Mark Stosberg (benchmarking)
    Chas Owens (initial "IN" operator support)
    Philip Collins (per-field SQL functions)
    Eric Kolve (hashref "AND" support)
    Mike Fragassi (enhancements to "BETWEEN" and "LIKE")
    Dan Kubb (support for "quote_char" and "name_sep")
    Guillermo Roditi (patch to cleanup "IN" and "BETWEEN", fix and tests for _order_by)
    Laurent Dami (internal refactoring, extensible list of special operators, literal SQL)
    Norbert Buchmuller (support for literal SQL in hashpair, misc. fixes & tests)
    Peter Rabbitson (rewrite of SQLA::Test, misc. fixes & tests)
    Oliver Charles (support for "RETURNING" after "INSERT")

Thanks!

=head1 SEE ALSO

L<DBIx::Class>, L<DBIx::Abstract>, L<CGI::FormBuilder>, L<HTML::QuickTable>.

=head1 AUTHOR

Copyright (c) 2001-2007 Nathan Wiger <nwiger@cpan.org>. All Rights Reserved.

This module is actively maintained by Matt Trout <mst@shadowcatsystems.co.uk>

For support, your best bet is to try the C<DBIx::Class> users mailing list.
While not an official support venue, C<DBIx::Class> makes heavy use of
C<SQL::Abstract>, and as such list members there are very familiar with
how to create queries.

=head1 LICENSE

This module is free software; you may copy this under the same
terms as perl itself (either the GNU General Public License or
the Artistic License)

=cut