Release list

Snapshot build (github250601) Latest

Latest

github-actions released this 01 Jun 12:54

667fe0c

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: https://github.com/xoseperez/espurna/compare/github250114..github250601
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/33617fc/CHANGELOG.md#1210-snapshot-build-2025-06-01

Build from source

PlatformIO: https://github.com/xoseperez/espurna/wiki/PlatformIO
Arduino IDE: https://github.com/xoseperez/espurna/wiki/ArduinoIDE

Assets 199

Debug.zip

sha256:96ef56b3af33ad95d4847d0724dbb96105ae5f0cc5a351272aab737550f8063c

695 MB 2025-06-01T12:35:30Z
espurna-1.21.0-git6b4031a6+github250601-aithinker-ai-light.bin

sha256:73c4e42962562bdc65eec6f6bc665dc2db59dbb91b14751ea154f29851efafa4

656 KB 2025-06-01T12:37:04Z
espurna-1.21.0-git6b4031a6+github250601-allnet-4duino-iot-wlan-relais.bin

sha256:ed05b186b5d772c1356355393b29a68a95286b69dfb9055a0274699268085dee

614 KB 2025-06-01T12:37:04Z
espurna-1.21.0-git6b4031a6+github250601-allterco-shelly1.bin

sha256:045f52096044b0dfc3adc7f6ba06a1562979a725d21734c6d88c6704a30752c9

614 KB 2025-06-01T12:37:04Z
espurna-1.21.0-git6b4031a6+github250601-allterco-shelly1pm.bin

sha256:16aa35073a8341653223b073a5329ed692e7bdbe2950f5ad0596c766cdb9162a

655 KB 2025-06-01T12:37:03Z
espurna-1.21.0-git6b4031a6+github250601-allterco-shelly2.bin

sha256:fcaa9ab24f5bdf5cab05c5cf672bd5da464c70cf03f4be9427c5a3c9c2f8cd06

614 KB 2025-06-01T12:37:03Z
espurna-1.21.0-git6b4031a6+github250601-allterco-shelly25.bin

sha256:9fc6af65249db2d60d5587436c108873744ca320674702a4fafb4ebac44d7e0a

657 KB 2025-06-01T12:37:02Z
espurna-1.21.0-git6b4031a6+github250601-aoycocr-x5p.bin

sha256:f0c8ae4468f2ec58d92471db8a81e2f4e4953ad61d95eb6032b92ffd81d9ea7c

614 KB 2025-06-01T12:37:02Z
espurna-1.21.0-git6b4031a6+github250601-arilux-al-lc01.bin

sha256:698b8ca34ad8ac1bd15fc1b2b1aa6e4bb640e984317cc9c010f724ae95ab40f9

658 KB 2025-06-01T12:37:02Z
espurna-1.21.0-git6b4031a6+github250601-arilux-al-lc02-v14.bin

sha256:ffae65736dc849436a50ffd5aae55bb6e7e2f29db9bbe161571f401a676ac137

658 KB 2025-06-01T12:37:01Z
Source code (zip)

2025-06-01T00:13:03Z
Source code (tar.gz)

2025-06-01T00:13:03Z

Snapshot build (github250114)

github-actions released this 14 Jan 20:50

26d08ee

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github240830...github250114
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/26d08ee0e1/CHANGELOG.md#1190-

Build from source

PlatformIO: https://github.com/xoseperez/espurna/wiki/PlatformIO
Arduino IDE: https://github.com/xoseperez/espurna/wiki/ArduinoIDE

Assets 199

Snapshot build (github240830)

github-actions released this 30 Aug 11:32

a518080

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github240615...github240830
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/330ed1cc/CHANGELOG.md#1180-snapshot-build-2024-08-30

Build from source

PlatformIO: https://github.com/xoseperez/espurna/wiki/PlatformIO
Arduino IDE: https://github.com/xoseperez/espurna/wiki/ArduinoIDE

Assets 199

Snapshot build (github240615)

github-actions released this 15 Jun 22:45

7536a6e

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github230330...github240615
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/ad49759/CHANGELOG.md#1160-dev-snapshot-build-2024-06-15

Build from source

PlatformIO: https://github.com/xoseperez/espurna/wiki/PlatformIO
Arduino IDE: https://github.com/xoseperez/espurna/wiki/ArduinoIDE

Assets 199

Snapshot build (github230330) Pre-release

Pre-release

github-actions released this 30 Mar 17:04

a0c341b

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github230112...github230330
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github230330/CHANGELOG.md

Assets 199

Snapshot build (github230112) Pre-release

Pre-release

github-actions released this 12 Jan 01:56

909949b

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github221212...github230112
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/dev/CHANGELOG.md#1150-dev-snapshot-build-2023-01-12

Assets 199

Snapshot build (github221212) Pre-release

Pre-release

github-actions released this 12 Dec 13:26

312c3ef

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github221204...github221212
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/dev/CHANGELOG.md#1150-dev-snapshot-build-2022-12-12

Assets 199

Snapshot build (github221204) Pre-release

Pre-release

github-actions released this 06 Dec 08:33

b8921b9

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github221116...github221204
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github221204/CHANGELOG.md

Assets 199

Snapshot build (github221116) Pre-release

Pre-release

github-actions released this 17 Nov 00:14

70d25ae

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github220925...github221116
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github221116/CHANGELOG.md

Assets 199

Snapshot build (github220925) Pre-release

Pre-release

github-actions released this 25 Sep 16:53

b0af0af

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github220923...github220925
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github220925/CHANGELOG.md

Assets 197