DRIVERS-3535 - Client Backpressure with retryAfterMS

source/client-backpressure/client-backpressure.md

@@ -129,12 +129,14 @@ rules:
         - To retry `runCommand`, both [retryWrites](../retryable-writes/retryable-writes.md#retrywrites) and
             [retryReads](../retryable-reads/retryable-reads.md#retryreads) MUST be enabled. See
             [Why must both `retryWrites` and `retryReads` be enabled to retry runCommand?](client-backpressure.md#why-must-both-retrywrites-and-retryreads-be-enabled-to-retry-runcommand)
-3. If the request is eligible for retry (as outlined in step 2 above), the client MUST apply exponential backoff
-    according to the following formula: `backoff = jitter * min(MAX_BACKOFF, BASE_BACKOFF * 2^(attempt - 1))`
-    - `jitter` is a random jitter value between 0 and 1.
-    - `BASE_BACKOFF` is constant 100ms.
-    - `MAX_BACKOFF` is 10000ms.
-    - This results in delays of 100ms and 200ms before accounting for jitter.
+3. If the request is eligible for retry (as outlined in step 2 above), the client MUST apply backoff according to the
+    following formula: `backoff = jitter * min(MAX_BACKOFF, BASE_BACKOFF * 2^(attempt - 1))`
+    1. `jitter` is a random jitter value between 0 and 1.
+    2. `MAX_BACKOFF` is 10000ms.
+    3. `BASE_BACKOFF` is constant 100ms.
+    4. This results in delays of 100ms and 200ms before accounting for jitter.
+    5. If `retryAfterMS` is present on the error and has a positive value, the client MUST use that value instead of
+        `BASE_BACKOFF`.
 4. If the request is eligible for retry (as outlined in step 2 above) and `enableOverloadRetargeting` is enabled, the
     client MUST add the previously used server's address to the list of deprioritized server addresses for
     [server selection](../server-selection/server-selection.md). Drivers MUST expose `enableOverloadRetargeting` as a
@@ -214,8 +216,11 @@ def execute_command_retryable(command, ...):
 
             if is_overload:
                 jitter = random.random() # Random float between [0.0, 1.0).
-                backoff = jitter * min(MAX_BACKOFF, BASE_BACKOFF * 2 ** (attempt - 1))
-
+                retry_after = BASE_BACKOFF
+                # If present on the error, retryAfterMS overrides the base backoff
+                if exc.retry_after_ms:
+                    retry_after = exc.retry_after_ms / 1000 # Convert from milliseconds to seconds
+                backoff = jitter * min(MAX_BACKOFF, retry_after * 2 ** (attempt - 1))
                 # If the delay exceeds the deadline, bail early.
                 if _csot.get_timeout():
                     if time.monotonic() + backoff > _csot.get_deadline():
@@ -433,6 +438,8 @@ to understand and configure.
 
 ## Changelog
 
+- 2026-06-16: Add support for retryAfterMS backoff calculation.
+
 - 2026-04-14: Clarify correct retry behavior when a mix of overload and non-overload errors are encountered.
 
 - 2026-03-30: Introduce phase 1 support without token buckets.

source/client-backpressure/tests/README.md

@@ -119,3 +119,62 @@ option.
 5. Assert that the raised error contains both the `RetryableError` and `SystemOverloadedError` error labels.
 
 6. Assert that the total number of started commands is `maxAdaptiveRetries` + 1 (2).
+
+#### Test 5: Overload Errors with retryAfterMS override base backoff
+
+Drivers SHOULD test that overload errors with `retryAfterMS` override the default backoff duration. This test MUST be
+executed against a MongoDB 9.0+ server that has enabled the `configureFailPoint` command with the `errorLabels` option.
+
+1. Let `client` be a `MongoClient`.
+
+2. Let `coll` be a collection.
+
+3. Configure the random number generator used for exponential backoff jitter to always return a number as close as
+    possible to `1`.
+
+4. Configure the following failPoint:
+
+    ```javascript
+        {
+            configureFailPoint: 'failCommand',
+            mode: 'alwaysOn',
+            data: {
+                failCommands: ['insert'],
+                errorCode: 462,
+                errorLabels: ['SystemOverloadedError', 'RetryableError']
+            }
+        }
+    ```
+
+5. Insert the document `{ a: 1 }`. Expect that the command errors. Measure the duration of the command execution.
+
+    ```javascript
+       const start = performance.now();
+       expect(
+        await coll.insertOne({ a: 1 }).catch(e => e)
+       ).to.be.an.instanceof(MongoServerError);
+       const end = performance.now();
+    ```
+
+6. Run the following command to set up `retryAfterMS` on overload errors.
+
+    ```python
+    client.admin.command("setParameter", 1, overloadRetryAfterMS=50)
+    ```
+
+7. Execute step 5 again.
+
+8. Run the following command to disable `retryAfterMS` on overload errors.
+
+    ```python
+    client.admin.command("setParameter", 1, overloadRetryAfterMS=0)
+    ```
+
+9. Compare the time between the two runs.
+
+    ```python
+    assertTrue(absolute_value(exponential_backoff_time - (with_retry_after_ms_time + 0.2 seconds)) < 0.2 seconds)
+    ```
+
+    The difference in the backoffs is 0.2 seconds. There is a 0.2-second window to account for potential variance between
+    the two runs.

source/mongodb-handshake/handshake.md

@@ -85,7 +85,7 @@ if stable_api_configured or client_options.load_balanced:
     cmd = {"hello": 1}
 else:
     cmd = {"legacy hello": 1, "helloOk": 1}
-cmd["backpressure"] = True
+cmd["backpressure"] = "2"
 cmd["client"] = client_metadata
 if client_options.compressors:
     cmd["compression"] = client_options.compressors

source/mongodb-handshake/tests/README.md

@@ -499,7 +499,7 @@ Before each test case, perform the setup.
 
 8. Assert that `initialClientMetadata` is identical to `updatedClientMetadata`.
 
-### Test 9: Handshake documents include `backpressure: true`
+### Test 9: Handshake documents include `backpressure: "2"`
 
 These tests require a mechanism for observing handshake documents sent to the server.
 
@@ -511,4 +511,4 @@ These tests require a mechanism for observing handshake documents sent to the se
 
 3. Assert that for every handshake document intercepted:
 
-    1. The document has a field `backpressure` whose value is `true`.
+    1. The document has a field `backpressure` whose value is `"2"`.